Pre-painted aluminum series
  • Name:
    Coated Aluminum for Shutter System
  • Model: DA-AA-0106
  •   Contact Us

Color Coated Aluminum Coil for  shutter system which is made with raw material from southwest aluminum Group or Suimin Aluminum. Paint from Becker is used for the top side of the Coated aluminum coil,Epoxy Resin from PPG is usded for the back side.

The typical material used here is A3005 H26,A3105 H26 or A3003 H16( the last one is even more cheap)

The Coated aluminum coil usually with the thickness (before coateing) are 0.18mm;0.22mm;0.23mm;0.25mm;0.26mm;0.27mm;0.28mm;0.30mm;0.30mm;0.45mm.

We can slit the coated aluminum coil into 118.8mm width or 127mm;133mm;142mm;187mm or any other width,which can be with the exact accuracy +/-0.02mm.

The most popular colors available here is the white,yellow,grey,silver,black,green,champaion.etc., we also can make the same as the color which you requested.

We also can make the Coated aluminum coil for the shutter box. which can meet the requirement here together.

Alloy8011/1235/1100/1145/3003,   Etc.
Thickness0.02mm   -2.5mm 
LengthAny   Length As Customer's Requirement
The Types Of Coating PE And PVDF Mainly
Thickness Paint LayerPVDF:   More Then 25 Micron; PE, More Then 18 Micron
Paint: PPG   Or Nippon
Interior Diameter405mm,   505mm, 150mm Etc.
ColorRAL   Or As Per Customers' Samples
Coating Hardness(Pencil   Hardness) More Than 2H
Impact ResistanceNo   Cracking And Peeling (50kg/Cm, ASTMD-2794:1993)
Flexibility (T-Bend)No   More Than 2T
MEK ResistanceMore   Than 100
PackageSeaworthy Export Packages
DeliveryApprox 30days After Receipt   Deposit
Trade TermFOB, CFR, C&F, CIF
Payment TermT/T   Or L/C( 30% Deposit, The Balance See Copy Of B/L Or Against 100% Irrevocable   L/C At Sight)

Color Flexibility 

The Flexibility Of The Organic Coating Is Assessed By Subjecting The Material To A Bend Test. The Bend Test May Be Carried Out According To ISO 1519. It May Be Carried Out Either In The Longitudinal Or The Transverse Direction Unless Otherwise Specified. As An Alternative To The Devices Covered In ISO 1519 The Following Method May Be Used To Carry Out The Bending.

Types Of Color Coated Aluminum

Color Coated Aluminum CoilWide Width   Which Over Than 600mm
Color Coated Aluminum SheetAluminum   Sheet With Customer's Satisfactory Length
Color Coated Aluminum Slit CoilAluminum   Slit Coils Which Width Is No More Than 600mm

Product Appliance

As Per Types Of Surface Coating Of Paint, Color Coated Aluminum Coils Can Be Divided Into Polyester (PE) Coated Aluminum Coil, Fluorocarbon (PVDF) Coating Aluminum Coil And Epoxy Coated Aluminum Coil.

According To The Thickness Of The Coating, It Can Be Divided Into Single-Coated Aluminum Coil (4-20 Microns); Double-Coated Aluminum Coil (25 To 28 Micron) And Triply-Coated Aluminum Coil (35-38 Micron).

Color Coated Aluminum Coil Is Widely Used In The Roofing And Cladding System, Ceiling System, Curtain Wall Plate, Shutter, Gutter, Composite Panel, Can, Home Appliances Board And Embossed Aluminum Coil. 

Immediately Consult
Message *
Name *
Verification code *
No comments
I want to comment
Content *
Verification Code *
other products
New Products
CopyRight © 2015 Changzhou Dingang Metal Material Co., Ltd. All Rights Reserved.   sitemap
Designed by Zhonghuan Internet
To share: