 |
DATC20210818
Dingang
20210818
| Quantity: | |
|---|---|
Red aluminum trim coil is prepainted aluminum coil stock designed for fabrication into exterior building trim, fascia covers, window and door wrapping, roof flashing and other formed architectural details. This product uses a durable aluminum substrate with a red polyester-coated finish for applications requiring a consistent decorative appearance and practical outdoor performance.
The current red trim coil specification is based on nominal 0.019-inch aluminum, AA3105 alloy and H28 temper. The material can be cut and brake-formed into custom profiles according to project dimensions, installation details and contractor requirements.
Dingang supplies aluminum trim coil for contractors, building-material distributors, fabricators and exterior finishing projects. Additional widths, colors, alloys and coating systems can be discussed for project and wholesale orders.
Request Red Aluminum Trim Coil Price
| Product Type | Prepainted aluminum trim coil |
| Color | Red |
| Aluminum Alloy | AA3105 |
| Temper | H28 |
| Nominal Thickness | 0.019'' (approximately 0.48 mm) |
| Finish | Smooth prepainted surface |
| Coating | Polyester paint coating |
| Fabrication | Suitable for cutting, bending and brake-forming into exterior trim profiles with appropriate equipment |
| Applications | Fascia covers, window trim, door trim, roof flashing, wood wrapping, edge trim and exterior architectural details |
| Custom Supply | Other widths, colors, alloys and coating systems can be discussed according to order requirements |
The following specification chart shows available aluminum trim coil configurations within the product range. It includes options that may differ from the standard red AA3105-H28 polyester-coated configuration above. Please confirm the required alloy, temper, width and coating system before production.
| Available Thickness | 0.019'' or other thicknesses subject to confirmation |
| Available Width | 14'' or 24'' |
| Available Alloys | AA3105, AA3003 |
| Available Temper | H24 and other product-specific tempers subject to confirmation |
| Inner Diameter | 300 mm |
| Color Options | White, Grey, Coffee, Black, Red and other colors for special orders |
| PVDF Coating Option | Paint coating not less than 25 µm |
| PE Coating Option | Paint coating not less than 18 µm |
| Packing | Small rolls packed in cartons |
| Payment Terms | L/C at sight or 30% T/T in advance as deposit and 70% balance against B/L copy |
| MOQ | 1 ton per specification |
| Delivery Time | Approximately 15–45 days depending on specification and order quantity |
| Loading Port | Shanghai Port or other agreed loading ports |
Red trim coil provides a strong architectural accent for exterior building details. It can be used to coordinate fascia, window surrounds, roof edges and other formed components with siding, roofing or branding colors.
The polyester coating is applied before fabrication, providing a uniform finished surface and reducing the need for secondary painting after the trim profile has been formed.
AA3105 aluminum is widely used for painted building products and formed exterior components. The selected thickness and temper provide a practical material for suitable brake-forming and trim fabrication operations.
Aluminum is lightweight and does not rust in the same way as ordinary carbon steel. These characteristics make coated aluminum practical for exterior trim applications where handling, appearance and corrosion resistance are important.
Trim coil can be cut and bent into different profiles according to project requirements. Contractors and fabricators can form fascia covers, window wraps, flashing, edge details and other custom exterior components using appropriate sheet-metal equipment.
Red aluminum trim coil can be formed into fascia covers to provide a finished metal surface around roof edges and coordinate fascia color with other exterior building components.
The coil can be brake-formed into window and door surrounds, capping profiles and edge details for residential and commercial exterior finishing projects.
Where suitable for the building design, aluminum trim coil can be formed into flashing, drip-edge-type profiles and other roof-edge details. Final dimensions and installation methods should follow project requirements.
The material can be formed to cover exposed exterior wood trim, creating a finished aluminum surface while reducing direct exposure of the underlying material to the weather.
Red trim coil can also be used for decorative edge covers, accent bands and other formed exterior details where a strong red color is part of the architectural design.
Discuss Your Red Trim Coil Application
Aluminum trim coil is commonly fabricated with a sheet-metal brake to create custom profiles directly from flat coil stock. The required flat width should be calculated from the finished profile dimensions, including bends, hems, overlaps and fastening areas.
Appropriate tooling, bending radius and handling procedures should be used to minimize marking or excessive stress on the prepainted surface. Protective handling is particularly important on visible architectural components.
For production projects, buyers can provide a drawing or finished profile dimensions so that suitable coil width and material specifications can be reviewed before ordering.
Red is available in different shades depending on the coating system and project requirement. For exterior projects that must match existing siding, roofing, cladding or corporate colors, buyers should provide an agreed color reference or physical sample.
For repeat orders, distributors and fabricators should identify the previously approved color specification to improve consistency between production batches. Color tolerance, gloss level and coating type should be agreed before mass production.
For red projects, provide a color reference or approved sample when exact matching is important. Different red shades can produce visibly different results on a finished elevation.
The standard product description uses nominal 0.019-inch aluminum. If a different thickness is required for stiffness or forming performance, specify it when requesting a quotation.
Calculate the developed width of the finished profile, including all folds, hems and overlaps. Selecting a suitable coil width can reduce cutting operations and material waste.
The red product description specifies AA3105-H28. Other trim coil configurations may use different alloys and tempers, so the final combination should be confirmed according to forming requirements.
This red product is described with a polyester finish. Other coating systems can be discussed for projects with different exterior exposure, color-retention or specification requirements.
Tell us whether the material will be brake-formed, roll-formed, slit or fabricated into a specific profile. This information helps review thickness, temper and width requirements.
For a faster and more accurate quotation, please provide:
Required red color or approved color reference
Aluminum alloy
Temper
Thickness
Coil width
Coating requirement
Required quantity
Finished application or profile
Packing requirement
Destination port or delivery location
If you have a trim profile drawing, sample or dimensional sketch, include it with your inquiry so the required flat coil width can be reviewed.
Send Your Red Aluminum Trim Coil Requirements
Red aluminum trim coil is used to fabricate exterior building trim such as fascia covers, window and door surrounds, roof flashing, edge profiles, wood wrapping and decorative architectural details.
The current red product description specifies AA3105 aluminum in H28 temper. Other alloy and temper combinations can be discussed for project requirements.
The nominal thickness is 0.019 inch, approximately 0.48 mm. Other thickness requirements should be confirmed before ordering.
The standard red product is described with a polyester paint coating. Other coating systems may be available for projects with different performance requirements.
Yes. Suitable aluminum trim coil can be formed using appropriate sheet-metal brake equipment. Proper tooling, bend radius and handling procedures should be used to protect the coated surface.
Custom red shades can be discussed for suitable order quantities. Providing an agreed color reference or physical sample is recommended when exact project color matching is required.
The available trim coil specification range includes 14-inch and 24-inch widths. Final width, alloy, temper and coating combinations should be confirmed for the specific order.
Prepainted aluminum trim coil is commonly used for exterior trim. Actual outdoor performance depends on the coating system, installation environment, fabrication quality and maintenance requirements of the project.
The listed minimum order quantity for the trim coil range is 1 ton per specification. Final MOQ should be confirmed according to color, alloy, width, thickness and coating requirements.
Please provide the required color, alloy, temper, thickness, width, coating type, quantity, finished application and destination. A profile drawing or sample is helpful when the trim will be custom formed.
