 |
DATC20200817
Dingang
20200817
| Quantity: | |
|---|---|
Black aluminum trim coil is prepainted aluminum coil stock designed for exterior building trim, window and door wrapping, fascia covers, roof flashing, edge trim and other custom-formed architectural details. The black finished surface provides a clean appearance that works well with modern residential, commercial and light industrial building designs.
The aluminum coil can be cut, slit and brake-formed into project-specific profiles using suitable sheet-metal fabrication equipment. Compared with unfinished sheet that requires additional painting, prepainted black trim coil provides a factory-finished surface ready for fabrication.
Dingang supplies black aluminum trim coil for contractors, building-material distributors, fabricators and exterior finishing projects. Available trim coil configurations include AA3003 and AA3105 aluminum, multiple widths, PE or PVDF coating options and custom specifications subject to order requirements.
Request Black Aluminum Trim Coil Price
| Product | Black prepainted aluminum trim coil |
| Color | Black; custom color references can be discussed for project orders |
| Available Thickness | 0.019'' or other thicknesses subject to order confirmation |
| Approx. Metric Thickness | 0.019'' ≈ 0.48 mm |
| Available Widths | 14'' or 24''; other widths can be discussed according to project requirements |
| Approx. Metric Widths | 355.6 mm or 609.6 mm |
| Available Alloys | AA3105, AA3003 |
| Available Temper | H24; other product-specific requirements should be confirmed before ordering |
| Inner Diameter | 300 mm |
| Surface | Smooth prepainted black finish |
| Coating Options | PVDF paint coating: not less than 25 µm |
| PE paint coating: not less than 18 µm | |
| Packing | Small rolls packed in cartons |
| Payment Terms | L/C at sight or 30% T/T in advance as deposit and 70% balance against B/L copy |
| MOQ | 1 ton per specification |
| Delivery Time | Approximately 15–45 days depending on specification and order quantity |
| Loading Port | Shanghai Port or other agreed loading ports |
| Typical Applications | Window and door wrapping, fascia covers, roof flashing, wood trim wrapping, edge trim, siding accessories and architectural finishing |
The following specification chart is retained from the original product information. Available combinations of alloy, temper, width, coating and color should be confirmed for each production order.
Black exterior trim is widely used with modern windows, dark roofing, metal siding, contemporary façades and contrasting architectural details. Prepainted black aluminum provides a consistent finished appearance without requiring contractors to paint the material after forming.
Aluminum is relatively lightweight, making trim coil practical to transport, cut, handle and form on site or in a fabrication workshop.
Aluminum does not rust in the same manner as ordinary carbon steel. Combined with suitable pretreatment and a correctly specified coating system, it provides a practical material for exterior trim applications.
The black finish is applied before fabrication, helping provide consistent color and reducing secondary painting operations after the trim profile has been formed.
Trim coil can be cut and brake-formed into project-specific profiles such as fascia covers, window casings, door surrounds, flashing and edge details. The appropriate thickness, temper and bend radius should be selected for the intended fabrication process.
Black aluminum trim coil can be formed around exterior window openings to create clean perimeter details, cover suitable underlying trim materials and coordinate the window area with dark exterior finishes.
The coil can be brake-formed into door surrounds, casing covers and edge profiles for residential and commercial exterior finishing projects.
Black trim coil can be fabricated into fascia covers to produce a finished metal surface along roof edges and coordinate fascia color with roofing, gutters, windows or siding.
Where suitable for the building design, aluminum trim coil can be formed into flashing and roof-edge profiles. Finished dimensions and installation details should follow the requirements of the specific roofing or wall assembly.
Exposed exterior wood trim can be wrapped with properly formed aluminum coil to create a finished metal surface. The complete installation should be detailed so that moisture is properly managed behind and around the trim.
Black aluminum trim coil can be used for suitable porch columns, deck posts, beams and other exterior finishing details where a formed black metal surface is required.
The black finish can be used for accent bands, corner details, edge covers and other custom architectural profiles on residential and commercial buildings.
Discuss Your Black Trim Coil Application
One of the main advantages of aluminum trim coil is that contractors and fabricators can form the material into custom profiles with suitable sheet-metal brake equipment. This makes one coil format useful for a wide range of trim dimensions and building details.
Before cutting the coil, calculate the developed width of the finished profile, including bends, hems, overlaps and fastening areas. Selecting an appropriate coil width can reduce unnecessary trimming and offcuts.
Appropriate tools, bend radii and protective handling procedures should be used during forming to reduce marking, scratching or excessive stress on the prepainted black surface.
AA3003 provides a useful combination of formability, corrosion resistance and moderate strength and is widely used for formed aluminum components.
AA3105 is commonly used for painted building products and exterior aluminum components. It can provide suitable forming characteristics for trim applications when the correct temper and thickness are selected.
The final alloy, temper and thickness should be selected according to the profile geometry, forming equipment and project requirements.
PE coating is a practical option for many general building trim applications where appearance, formability and economical production are important. The available trim coil range lists PE paint coating of not less than 18 µm.
PVDF coating can be selected for exterior projects requiring enhanced resistance to UV exposure, weathering and long-term color change. The available trim coil range lists PVDF paint coating of not less than 25 µm.
The coating system should be selected according to installation environment, expected outdoor exposure, project specification and required appearance.
Different black finishes can vary in shade, gloss and surface appearance. For projects requiring coordination with windows, roofing, siding, gutters or corporate design standards, an agreed color reference or physical sample should be provided before production.
For repeat orders, distributors and contractors should reference the previously approved specification whenever possible. This is especially important when trim from different production batches will be installed on the same elevation.
Specify whether the material will be used for fascia, window wrapping, door trim, roof flashing, siding accessories, wood wrapping or another custom profile.
The available trim coil range includes nominal 0.019-inch aluminum. Other thickness requirements should be discussed when greater stiffness or different forming characteristics are required.
Standard available widths include 14 inches and 24 inches. Calculate the full developed width of the finished trim profile before selecting the coil width.
AA3003 and AA3105 are available options within the trim coil range. The required temper should be selected according to forming method, bend geometry and finished component stiffness.
Select the coating system according to the required outdoor durability, color retention, project specification and environmental exposure.
If the coil must match existing windows, siding, roofing or another building component, provide the required color reference or approved sample before production.
For a faster and more accurate quotation, please provide the required alloy, temper, thickness, width, black color reference, coating type, quantity, application, packaging requirements and destination.
If the material will be fabricated into a custom profile, a drawing, sample or dimensional sketch can help confirm the required flat width and material specification.
Send Your Black Aluminum Trim Coil Requirements
Black aluminum trim coil is commonly used for fascia covers, window and door wrapping, roof flashing, siding accessories, wood trim wrapping and custom exterior architectural profiles.
The available trim coil range includes nominal 0.019-inch material, approximately 0.48 mm. Other thicknesses can be discussed according to project requirements.
Standard available widths include 14 inches and 24 inches, approximately 355.6 mm and 609.6 mm. Other widths can be discussed for suitable order quantities.
Available trim coil options include AA3003 and AA3105. The appropriate alloy and temper should be selected according to forming and project requirements.
Yes. Suitable aluminum trim coil can be cut and formed with appropriate sheet-metal brake equipment. Tooling and bend radii should be selected to avoid unnecessary damage to the painted surface.
Prepainted aluminum trim coil is widely used for exterior building trim. Actual outdoor performance depends on the coating system, installation environment, fabrication quality and maintenance conditions.
PE coating is suitable for many general building trim applications and provides a practical balance of appearance, formability and cost. PVDF can be selected for projects requiring enhanced outdoor weather resistance and color retention.
Project-specific black shades can be discussed. Providing an approved color reference or physical sample is recommended when matching windows, roofing, siding or other exterior components.
Yes. Window and door wrapping is one of the common applications for aluminum trim coil. The material can be formed into perimeter covers and casing profiles according to the opening dimensions.
The listed minimum order quantity for the available trim coil range is 1 ton per specification. Final MOQ should be confirmed according to alloy, width, thickness, coating and color requirements.
Please provide the required alloy, temper, thickness, width, black color reference, PE or PVDF coating requirement, quantity, finished application and destination. A drawing is helpful for custom-formed trim projects.
