Alloy 1050 Color Coated Aluminum Coil

Alloy 1050 Color Coated Aluminum Coil is baed on AA1050 aluminum alloy ,and the temper with HO, H12,H14 etc.,As one of the softest and most formable aluminum alloys, it is widely used in applications requiring high malleability, corrosion resistance, and cost efficiency.

Request A Quick Quote

Chemical Composition of Alloy 1050 Color Coated Aluminum Coil

Element of Alloy 1050	Content (%)
Aluminum (Al)	≥99.5
Silicon (Si)	≤0.25
Iron (Fe)	≤0.40
Other Impurities	≤0.05

Note: The ultra-low impurity content enhances its purity, making it ideal for applications sensitive to contamination.

Key Properties of Alloy 1050 Color Coated Aluminum Coil

Mechanical Properties of Alloy 1050 Color Coated Aluminum Coil

60 Property	Typical Value (Temper: O)
Tensile Strength	60–95 MPa
Yield Strength (0.2% offset)	20–40 MPa
Elongation at Break	25–35%
Hardness (Rockwell B)	20–30

Temper Designations: Commonly used in the O temper for maximum ductility or H12/H14 for slightly increased strength.

Physical Properties of Alloy 1050 Color Coated Aluminum Coil

Property of alloy 1050	Value
Density	2.7 g/cm³
Melting Point	643–657°C
Thermal Conductivity	205 W/m·K
Electrical Conductivity	61% IACS
Thermal Expansion Coefficient	23.1×10⁻⁶/°C (20–100°C)

Advantages of Alloy 1050 Color Coated Aluminum Coil

Ultra-High Purity

Reduces the risk of contamination in sensitive applications (e.g., food, pharmaceuticals).

Exceptional Formability

Exceptional Formability

Cost-Effective

Lower production cost compared to higher-strength alloys due to simple processing.

Recyclability

100% recyclable with minimal property loss, supporting sustainability.

Contact Our Support Team

Standards and Specifications of Alloy 1050 Color Coated Aluminum Coil

ASTM	B209
ISO	ISO 26204 (alloy designations), ISO 6892 (mechanical testing),ISO 9001,ISO 14001.
UNS	A91050 (United States Numbering System).

Our Capabilities of Alloy 1050 Color Coated Aluminum Coil

bg4

FAQ

bg4

Frequently Asked Questions

We have compiled the most frequently asked questions about our color coated aluminums here for your convenience, but please feel free to contact us if you have any additional questions.

Alloy 1050 Color Coated Aluminum Coil FAQ

Q What standards does 1050 color coated aluminum coil comply with?

A
The common standards mainly include: GB/T in China ,ASTM in United States and EN AW-1050A in Europe.
Q Is 1050 aluminum coated coil environmentally friendly?

A Yes. If is 100% recyclable and low environmental impact with long service life.
Q What max width is available ?

A
Standard widths: 80–2650 mm

Coil ID: 300mm/400mm/508mm/610mm

Coil weight:1–3 tons
Q What thickness range for 1050 color coated aluminum coil?

A 0.18-4.0mm
Q How does 1050 Color Coated Aluminum Coil compare with 3003 color coated aluminum?

A
AA1050 Color coated aluminum coil is Better formability, smoother surface, lower strength.

3003 Color coated aluminum coil is Higher strength, better dent resistance, slightly reduced formability.
Q What coating types are available for 1050 color coated aluminum coil?

A
A:PE (Polyester) – indoor and short-term outdoor use(8 Years or evenmore)

B:PVDF (Fluorocarbon) – long-term outdoor and architectural use(25Years or evenmore)

C:PU / Epoxy – special industrial applications

D:SMP(Silicone Modified Polyester‌）– Mid-term outdoor use (15Years or evenmore)
Q Is it possible to place an order with different width in one thickness for Alloy 1050 Color Coated Aluminum Coil?

A Yes
Q What should be provide before confirm the order of Alloy 1050 Color Coated Aluminum Coil?

A The below information is necessary before confirm the order,
1. The usage of the material,
2. The size of the material such as thickness, width.
3. The color code or the color sample are necessary.
4. The requirement of the bending, moulding of the material.
Q Is it possible to get sample of Alloy 1050 Color Coated Aluminum Coil Material?

A Yes

Q What are the Chemical Composition difference for Alloy 1050, 1060 and 1100?

A

Alloy	Aluminum Content(%)	Key Alloy Elements
AA1050	≥ 99.50% Al	Very small Fe, Si
AA1060	≥ 99.60% Al	Even lower Fe, Si
AA1100	≥ 99.00% Al	Slightly higher Cu (≈0.05–0.20%)

Q What are the Alloy 1050 Color Coated Aluminum Material Mainly Used for in different industry?

A

Industry	Typical Products
Constructions	Facade, Ceiling, Cladding
Home appliance	Housings
Transportation	Interior/exterior Panels, Trims
Electronics	Enclosures, Cabinets
Advertising	Signage, Displays
Furniture	Decorative panels,Display panel
Packaging	Containers, Covers,Disposable meal box

Q What are the most suitable temper states for 1050 aluminum alloy during stretching, stamping, and bending?

A

Forming Process	Recommended Temper	Alternative Tempers
Stretch forming (deep drawing)	O	H12 (very lightly strain-hardened)
Stamping (shallow drawing / blanking)	O	H12 / H14
Bending	O	H12 / H14

Q What are the annealed tempers for 1050 aluminum alloy?

A
Here is a clear and technically accurate English translation of your text, using standard aluminum-alloy terminology commonly seen in GB / ASTM / EN contexts:

The temper (also referred to as processing condition) of 1050 aluminum alloy covers multiple types, mainly including annealed tempers and strain-hardened tempers, which can be classified as follows:

Annealed Temper (O Temper)

The material is fully annealed to eliminate residual stresses and soften the microstructure.

The typical annealing temperature range is 350–430 °C, followed by holding and furnace cooling.

This temper is suitable for applications requiring high ductility and excellent formability, such as deep drawing and complex forming operations.

Strain-Hardened Tempers (H Tempers)

Strength is enhanced through cold rolling, cold drawing, or other cold-working processes, resulting in a significant increase in tensile strength accompanied by a reduction in ductility.

Common sub-tempers include:

H12 / H14 / H16 / H18

Correspond to increasing degrees of cold deformation, with progressively higher strength and decreasing ductility.

H22 / H24 / H26 / H28

Suitable for moderate strength requirements, involving relatively large amounts of deformation.

H32 / H34 / H36 / H38

Represent high levels of cold work, providing the highest strength but low elongation.

Other Tempers

Some sources mention T-series heat-treated tempers (such as T351 and T651). However, 1050 aluminum alloy is primarily supplied in annealed and strain-hardened tempers, as heat-treatment strengthening is very limited for this alloy.

In practical applications, temper selection should be based on manufacturing processes and performance requirements.

For example, the O temper is commonly used for deep drawing and forming, while H tempers are selected for components requiring higher strength.
Q what is Alloy 1050 Color Coated Aluminum Coil?

A Alloy 1050 Color Coated Aluminum Coil...

Factory FAQ

Q How long is the production lead time?

A
Standard colors/specs: 20–30 days,Custom colors or coatings: 45–60 days.
Q Is it possible to apply protective film on the surface of color coated aluminum coil??

A Yes.
Q What thickness range is available in our facotry?

A 0.1-4.0mm.
Q What kind of Changzhou Dingang company?

A Changzhou Dingang is a professional manufacturer of aluminum productions and has its own warehouse. We are working hard to open up the international market.
Q Can you accept small orders?

A Depend on our inventory, normally we accept small order.
Q How to guarantee the quality?

A Every production procedure will be tested and evaluated. From the selection of raw materials to packaging for shipment. Only products that pass all tests will be delivered for export.
Q Can you provide free samples?

A Yes, we can provide free sample for testing. Buyer should bear all the shipping costs.
Q What is your factory advantage?

A We are manufacturer. We have professional quality control engineers to ensure high quality, zero defect products to our customer. Our professional sale team and competitive price will help customer to finish order in short time. Save Time!
Q What is package?

A Standard Export Packing(PVC+waterproof paper +sea-worthy wooden packing).
Q How about the aluminum coil product delivery time?

A For color samples , we can offer you within 3 working days.
30 - 45 days for mass production after getting order confirmation and down payment.
Q What is the payment term?

A 30% T/T deposit, 70% balance T/T or L/C irrevocable payment before shipment.
Q Can we visit your factory if we go to China?

A Warmly welcome to visit our factory, we will show you around.

Consult Us To Get Your Customized Aluminum Solution

We help you avoid the pitfalls to delivery the quality and value your aluminum need, on-time and on-budget.

Send Us Your Inquiry Today

Contact Us

joey@cnchangsong.com

+86-18602595888

Building 2, Zhixing Business Plaza, No.25 North Street, Zhonglou District, Changzhou City, Jiangsu Province, China

Chaoyang road, Konggang economic development area, Lianshui, Huai'an city, Jiangsu,China

© COPYRIGHT 2023 CHANGZHOU DINGANG METAL MATERIAL CO., LTD. ALL RIGHTS RESERVED.