3003 H24 Wood Grain Aluminum Strip for Outdoor Roller Blinds

3003 H24 Wood Grain Aluminum Strip for Outdoor Roller Blinds

3003 H24 wood grain aluminum strip is designed as a prefinished raw material for outdoor roller blinds, shutter slats, louvered windows, venetian blind components and architectural shading systems. It combines a formable aluminum-manganese substrate with a decorative wood-grain surface that provides the appearance of oak, walnut, pine and other timber patterns without using solid wood slats.

Standard thickness ranges from 0.3 mm to 2.0 mm, with widths from 10 mm to 100 mm. Common slit widths include 20 mm, 30 mm and 40 mm, while customized widths can be produced according to blind slat geometry, roll-forming equipment and finished shutter design.

The H24 temper provides a practical combination of strength and formability for suitable slitting, bending, edge forming and shutter-slat fabrication. Final forming performance should be confirmed against the actual gauge, profile geometry, bend radius and coating construction before volume production.

Request a Roller Blind Strip Quote Request Wood Grain Samples

Technical Specifications

Specification note: Mechanical properties, coating thickness, weathering performance, salt-spray resistance and dimensional tolerances should be confirmed against the exact material thickness, coating construction, test method and purchase specification before production.

Send Your Thickness, Width & Wood Pattern

Why Use 3003 H24 for Roller Blind Slats?

Balanced Strength and Formability

3003 is an aluminum-manganese alloy that combines corrosion resistance with greater strength than commercially pure aluminum. H24 temper is strain hardened and partially annealed to approximately half-hard condition, providing a useful balance between stiffness and forming capability.

For roller blind manufacturing, the material can be slit, bent, curled or roll-formed into suitable slat geometries. Tight-radius bends and complex profiles should be evaluated on the actual production line because forming performance changes with thickness, profile design and coating flexibility.

Corrosion Resistance for Humid Environments

3003 aluminum provides good atmospheric corrosion resistance and does not develop the conventional red rust associated with carbon steel. The decorative coating adds additional surface protection for shutters exposed to rain, humidity and routine environmental contamination.

Lightweight Shutter Components

With a density of approximately 2.7 g/cm³, aluminum provides a lightweight raw material for movable blind and shutter components. Lower slat weight can support easier handling and reduce moving mass compared with heavier steel components, although complete shutter performance depends on the slat profile, rails, operating mechanism and system design.

Wood Grain Coating and Surface Options

Thermal-Transfer Wood Grain Finish

Thermal-transfer technology reproduces natural-looking wood patterns over a prepared aluminum surface. It allows roller blind manufacturers to offer timber-style aesthetics while retaining the low weight, dimensional stability and corrosion characteristics of aluminum.

Oak, Walnut, Pine and Custom Patterns

Standard wood-grain options can include oak, walnut, pine and other architectural patterns. Custom pattern matching can be discussed using a physical reference sample or approved color and pattern standard.

Outdoor Weathering Requirements

For exterior roller blinds, the coating system should be selected according to UV intensity, orientation, temperature cycling, rainfall and local environment. Accelerated QUV or other weathering tests can be specified when color and gloss retention requirements are part of the project.

Accelerated weathering results should not be converted directly into a fixed number of outdoor service years without a defined correlation, exposure climate and coating-system warranty.

Coastal and Salt-Bearing Environments

For coastal buildings or locations exposed to airborne chlorides, buyers should specify the required coating system and corrosion test criteria. Extended salt-spray targets such as 1000-hour-class testing should be linked to the actual pretreatment, primer, topcoat and acceptance criteria rather than assumed for every wood-grain finish.

Precision Slitting and Shutter Manufacturing

Custom Slit Widths from 10 mm to 100 mm

Narrow strip can be slit according to shutter slat width, edge-folding allowance and downstream forming requirements. Common widths of 20 mm, 30 mm and 40 mm are available, with custom dimensions subject to production confirmation.

Roll-Forming, Bending and Edge Curling

3003 H24 strip can be processed using suitable roll-forming and bending equipment for shutter components. The minimum bend radius and forming sequence should be confirmed when the wood-grain surface passes through severe bends or repeated forming stations.

Surface Protection During Processing

Where a decorative wood-grain face requires additional protection, removable protective film can be discussed for slitting, forming, handling and transport. Film adhesion should be matched to the finished surface and removal process.

Main Applications

Outdoor Roller Blinds

Wood-grain coated strip can be formed into components for exterior roller blind systems used on residential windows, balconies, villas, hotels and commercial buildings.

Louvered Shutters and Shutter Windows

The material can be used for suitable shutter slats and decorative louver components where a timber-style appearance, low material weight and corrosion resistance are required.

Venetian Blind Components

Custom slit widths can support venetian blind and adjustable shading products where consistent narrow-strip dimensions and decorative surface quality are important.

Architectural Sunshade Systems

Applications can include façade shading elements, balcony screens, decorative ventilation louvers and sunroom shading components. Wind resistance and structural performance must be evaluated at the complete slat, rail, bracket and shutter-system level.

Bathrooms and Humid Interior Spaces

Aluminum does not swell in the same manner as natural wood when exposed to humidity, making wood-grain coated components suitable for selected bathroom, kitchen and other humid-space shutter applications.

Material Comparison for Shutter Components

Quality Control for Roller Blind Strip

Inspection requirements can be defined according to the shutter manufacturer's production process and finished appearance requirements. Typical controls include substrate dimensions, slit-width accuracy, surface finish, pattern consistency, coating adhesion and forming performance.

• Alloy and temper verification

• Thickness measurement

• Slit-width and edge-quality inspection

• Wood-grain pattern and color comparison

• Coating thickness inspection where specified

• Cross-cut or agreed adhesion testing

• Bend or roll-forming evaluation where required

• Weathering or corrosion testing according to agreed project requirements

Request Technical Data & Samples

Packaging and Export Supply

Wood-grain aluminum strip can be protected with moisture-resistant wrapping and packed on export-grade wooden pallets. Edge protection and protective film can be added according to slit width, surface finish and transportation requirements.

Packaging configuration can be adjusted for narrow slit coils, larger master coils or customer-specific bundles. Shipping labels can identify alloy, temper, thickness, width, wood pattern, batch number and net weight.

Information Required for a Quotation

For faster pricing and production confirmation, please provide the required thickness, strip width, wood-grain pattern, coating requirement, coil or bundle format, quantity and destination.

Roller blind and shutter manufacturers can also provide the finished slat drawing, bend radius, feed width, forming-line information and required weathering or corrosion tests for technical review.

Get a Custom Roller Blind Strip Proposal

FAQ

Will the wood-grain finish fade during outdoor use?

All exterior decorative coatings change gradually under UV and weather exposure. The rate depends on the coating system, pigment, wood pattern, climate, orientation and maintenance. If a project has specific color-retention requirements, an agreed accelerated-weathering test or coating warranty should be specified before production.

Can the strip width and wood pattern be customized?

Yes. Thickness from 0.3 mm to 2.0 mm and widths from 10 mm to 100 mm are available within the product range. Oak, walnut, pine and other wood patterns can be supplied, and custom pattern matching can be discussed using an approved sample.

Is the strip suitable for coastal buildings?

3003 aluminum provides useful atmospheric corrosion resistance, but coastal projects should use a coating system selected for chloride exposure. If a salt-spray performance target is required, the test duration, method and acceptance criteria should be specified.

Can 3003 H24 strip be roll-formed into shutter slats?

Yes, for suitable slat geometries. H24 provides useful strength and formability, but tight bends and repeated forming operations should be tested using the actual thickness, wood-grain coating and production equipment.

Does the aluminum strip determine the wind resistance of a roller blind?

No. Wind resistance belongs to the complete shutter system and depends on slat profile, material thickness, shutter width, side rails, fasteners, brackets and installation. The aluminum strip specification should therefore be selected together with the finished-system design.

How should the wood-grain surface be cleaned?

Routine cleaning can normally be performed with water, a soft cloth and a mild neutral cleaner compatible with the approved coating. Abrasive pads, sharp tools and aggressive chemicals should be avoided unless their compatibility has been confirmed.

Can wood-grain aluminum strip be used for bathroom shutters?

Yes, aluminum does not absorb moisture and swell in the same way as natural wood. The finished shutter should still be designed for the expected humidity, condensation and cleaning environment.

What mechanical properties should be used for component design?

Typical 3003-H24 reference values are around 160 MPa ultimate tensile strength and 130 MPa proof strength, but design and acceptance values should be taken from the applicable material standard and the mill documentation for the ordered thickness.

What information is needed for accurate pricing?

Please provide thickness, width, wood-grain pattern, coating performance requirements, quantity, packaging format and destination. A slat drawing or existing material sample can also be supplied for technical comparison.

Request a 3003 H24 Wood Grain Aluminum Strip Quote

If you manufacture outdoor roller blinds, shutter windows, venetian blinds or architectural sunshade systems, send us your required thickness, slit width, wood pattern, finished slat drawing and purchase quantity. Our technical sales team can review the specification and prepare a quotation and sample proposal.

Contact Us for Pricing & Wood Grain Samples