High Reflective Mirror Aluminum Sheet Polished Mirror Aluminium Plate for Lighting Reflector Solar Decoration
You are here: Home » Brushed Surface » Anodized & Decorative Aluminum » Anodized Mirror Aluminum Plate » High Reflective Mirror Aluminum Sheet Polished Mirror Aluminium Plate for Lighting Reflector Solar Decoration

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

High Reflective Mirror Aluminum Sheet Polished Mirror Aluminium Plate for Lighting Reflector Solar Decoration

High reflective mirror aluminum sheet for lighting reflectors, solar applications and decorative panels, available in polished, anodized and coated finishes with 80-95% reflectivity and custom sizes.
Availability:
Quantity:

High Reflective Mirror Aluminum Sheet for Lighting, Solar and Decoration

High reflective mirror aluminum sheet is a decorative and functional aluminum material engineered to provide a bright reflective surface for lighting reflectors, optical components, solar applications, interior decoration, displays, signs and fabricated reflective parts.

The published product range includes 1050, 1060, 1100 and 3003 aluminum, with thicknesses from 0.3mm to 3.0mm. Polished mirror, anodized mirror and vacuum-coated mirror surface options are available according to the required appearance, reflectance level, environmental exposure and fabrication process.

Current published reflectivity grades include 80%, 85%, 90% and 95%. For optical or solar applications, buyers should additionally define whether the requirement refers to total light reflectance, specular reflectance, hemispherical reflectance or solar-weighted reflectance and specify the applicable test method.

Request a Quotation

Technical Specifications

Item

Published / Available Specification

Purchasing Consideration

Product Type

High reflective mirror aluminum sheet / plate

Select optical or decorative grade according to final application

Base Alloys

1050 / 1060 / 1100 / 3003

Alloy selection affects forming, strength and surface consistency

Thickness Range

0.3mm–3.0mm

Final thickness should match reflector geometry, panel size and forming requirements

Standard Sizes

1000×2000mm / 1220×2440mm / 1250×2500mm

Confirm dimensional tolerances before production

Custom Size

Custom width and length according to drawing

Provide finished blank or panel dimensions

Mirror Surface Types

Polished / anodized / vacuum-coated mirror

Reflectance and durability vary significantly by surface construction

Published Reflectivity Grades

80% / 85% / 90% / 95%

Confirm reflectance definition, wavelength range and test method

Published Surface Hardness

1H–3H depending on surface treatment

Confirm applicable hardness method and surface construction

Colors

Silver / gold / bronze / rose gold / black / blue / custom

Colored mirror surfaces are primarily selected for decorative applications unless optical performance is separately verified

Protective Film

Double-side PE protective film published as standard

Film type, tack and removal timing should match processing and storage conditions

Processing

Cutting / bending / punching / stamping / laser processing

Processing capability depends on alloy, temper, thickness and mirror surface construction

Reflectivity values should be linked to the exact mirror surface and test method. A polished aluminum sheet, anodized mirror sheet and PVD or vacuum-enhanced reflector should not be assumed to provide identical optical performance.

Get Reflectivity Specifications & Pricing

Understanding Reflectivity

A single reflectivity percentage does not completely describe the optical performance of a mirror aluminum surface. Different applications require different ways of measuring reflected light.

Total Light Reflectance

Total reflectance measures the overall amount of incident light reflected by the surface, including both directional and scattered reflected light. It is an important parameter for many lighting applications.

Specular Reflectance

Specular reflectance describes the portion of light reflected in a controlled mirror-like direction. This parameter is important for narrow-beam lighting, optical reflectors and concentrating solar systems.

Diffuse Reflectance

Diffuse reflection describes light scattered over a wider angular range. Some lighting designs intentionally require diffuse or semi-specular surfaces rather than the highest possible mirror clarity.

Solar-Weighted Reflectance

For solar applications, reflectance should be evaluated across the solar spectrum and weighted according to solar energy distribution. Solar concentrators may additionally require a defined specular reflectance and acceptance angle.

80%, 85%, 90% and 95% Reflectivity Grades

Published Grade

General Selection Direction

What to Confirm

80%

Decorative and general reflective applications

Surface type and optical test definition

85%

Decorative or general lighting reflector applications

Total versus specular reflection requirement

90%

Higher-reflectance lighting and technical reflector applications

Measured reflectance, surface construction and forming requirements

95%

High-reflectance grades requiring an enhanced mirror surface

Exact optical measurement, specularity, wavelength range and protective layer

These percentages are published grade references and should not be used alone to qualify a material for an optical or solar design. The relevant optical property and test conditions should be included in the order specification.

Polished Mirror Aluminum

Polished mirror aluminum is produced through mechanical surface finishing to create a smooth, bright and highly reflective metallic appearance.

It can be used for decorative panels, signs, displays and suitable reflector components where the required surface protection and optical performance are compatible with the polished construction.

Mechanical polishing alone should not automatically be considered equivalent to a protected anodized or PVD-enhanced optical reflector, particularly where long-term oxidation, humidity or outdoor exposure is expected.

Anodized Mirror Aluminum

Anodized mirror aluminum combines a bright prepared aluminum surface with a controlled anodic oxide layer. The oxide layer can provide additional surface protection while retaining a metallic reflective appearance.

Optical performance depends on aluminum purity, surface preparation, anodic-film construction, sealing and surface roughness.

Where an anodized mirror is required for technical use, buyers should specify reflectance requirements together with anodic-film thickness, sealing condition and environmental exposure.

Vacuum-Coated and Enhanced Mirror Aluminum

Vacuum-deposited or PVD-enhanced reflective surfaces can be used where higher optical reflectance is required than conventional mechanically polished or standard anodized aluminum can provide.

The complete reflective system can include a prepared aluminum substrate, bonding or anodized layers, a high-reflectance metallic layer and one or more protective or optical enhancement layers.

The exact layer construction should be confirmed when a specific total or specular reflectance is contract-critical.

Mirror Surface Comparison

Surface Type

Main Characteristic

Typical Selection Direction

Polished Mirror

Mechanically polished metallic surface

Decoration, displays and compatible reflector parts

Anodized Mirror

Reflective aluminum surface with anodic oxide protection

Lighting, architectural and suitable technical reflectors

Vacuum / PVD Enhanced Mirror

Enhanced multilayer reflective construction

High-efficiency lighting and applications requiring higher verified reflectance

Lighting Reflector Applications

Mirror aluminum sheet can be formed into reflectors for compatible LED luminaires, downlights, linear lighting, stage lighting, commercial lighting and other light-management components.

Total Reflectance

Higher total reflectance can reduce optical losses, but reflector efficiency also depends on geometry, light-source position, surface distribution and the required beam pattern.

Specular vs Diffuse Surface

A narrow-beam luminaire may require a highly specular surface, while some general lighting systems benefit from semi-specular or diffuse reflection to achieve more uniform light distribution.

Reflector Forming

Where the sheet will be stamped or deep formed into a reflector, buyers should provide the reflector geometry, forming depth, bend radius and required post-forming optical appearance.

Solar Reflector Applications

High reflective aluminum can be evaluated for suitable solar thermal collectors, secondary reflectors and low- or medium-concentration solar systems when its optical and environmental performance meet the project requirements.

For concentrating solar applications, total reflectivity alone is not sufficient. The project may require solar-weighted hemispherical reflectance, specular reflectance at a defined acceptance angle, angular scattering and long-term optical durability.

Specularity

A solar concentrator must direct reflected sunlight toward a receiver. Therefore, a material with high total reflectance but excessive scattering may perform differently from a highly specular reflector.

Outdoor Optical Durability

Solar reflectors can be exposed to humidity, pollution, UV radiation, dust and cleaning cycles. The selected surface should therefore be evaluated for the expected climate rather than relying only on its initial reflectance value.

Project Qualification

Where the material is intended for solar concentration, buyers should provide the required solar-weighted reflectance, specular requirement, acceptance angle, outdoor exposure and expected forming geometry before selecting a mirror grade.

Decorative Mirror Aluminum

Mirror aluminum can be used for interior wall panels, ceilings, column covers, hotel decoration, retail interiors, displays and other applications requiring a bright metallic appearance.

Decorative applications may prioritize mirror clarity, color, surface uniformity and scratch protection rather than laboratory optical efficiency.

Silver Mirror

Silver is the standard bright metallic mirror appearance and can be used for both decorative and suitable reflector applications depending on the exact surface construction.

Gold, Bronze and Rose Gold

Gold, bronze and rose-gold mirror surfaces are primarily decorative finishes for architectural panels, retail displays, signs, furniture and interior design components.

Black and Blue Mirror

Black, blue and other colored mirror surfaces can be produced for decorative projects according to the selected coating or surface-treatment system.

Colored decorative mirror products should not automatically be assigned the same optical reflectance as a silver high-reflectance technical reflector.

Mirror Aluminum vs Glass Mirror

Property

Mirror Aluminum Sheet

Conventional Glass Mirror

Substrate

Aluminum sheet

Glass

Breakage Behavior

Metallic sheet is not brittle like glass

Brittle material that can fracture

Formability

Can be fabricated into compatible curved or formed components

Limited conventional forming after manufacture

Image Quality

Depends strongly on surface flatness and mirror finish

Commonly preferred for accurate visual mirror images

Technical Reflector Use

Available in specialized optical reflector grades

Silvered glass is also used in high-performance optical and solar systems

Weight comparisons should be based on the actual thickness and complete component construction rather than assuming a fixed weight ratio between aluminum sheet and glass mirror.

Alloy Selection

Alloy

General Characteristic

Selection Direction

1050

High aluminum content and useful formability

Decorative and compatible reflective applications

1060

Commercially pure aluminum with good forming characteristics

Reflective and formed decorative components

1100

Commercially pure aluminum suitable for general fabrication

Lighting, decoration and fabricated reflector components

3003

Aluminum-manganese alloy with greater strength than 1xxx series

Decorative or reflector panels requiring additional rigidity

Where very high optical reflectance is required, the complete reflective surface system is often more important than the nominal base alloy alone.

Bending and Forming Mirror Aluminum

Bending

Mirror aluminum can be bent for compatible applications, but minimum bend radius depends on alloy, temper, thickness and reflective surface construction.

Stamping and Deep Forming

Where the sheet will be stamped or deep formed into lighting reflectors, the forming depth, corner radius and required post-forming optical quality should be evaluated on representative material.

Surface Change After Forming

Severe forming can alter surface smoothness, local gloss and optical distribution. A flat-sheet reflectance value should therefore not automatically be assumed to remain identical after aggressive forming.

Trial Forming

For optical reflectors or complex decorative components, production trials are recommended before bulk ordering.

Protective Film and Surface Handling

Mirror surfaces show scratches, pressure marks and contamination more readily than conventional mill-finish aluminum, so protective film is important during fabrication, packing and installation.

The current product specification lists double-side thick PE protective film. Film type and adhesion level should be matched to the surface treatment and expected storage period.

Protective film should generally remain in place during compatible cutting and handling operations where practical, but it should be removed within the film supplier's recommended storage and installation period.

Clean gloves and non-abrasive handling equipment are recommended for exposed optical and decorative mirror surfaces.

Surface Quality Requirements

Inspection Item

What to Specify

Reflectance

Total, specular, hemispherical or solar-weighted value with test method

Mirror Uniformity

Approved visual sample and permitted variation

Surface Defects

Scratch, dent, stain, roll mark and other agreed acceptance limits

Surface Roughness

Specify where optical specularity depends on surface smoothness

Flatness

Required tolerance for large mirror or optical panels

Color

Approved physical sample for decorative colored mirror

Protective Film

Film type, coverage, tack and removal requirement

Main Applications

  • LED lighting reflectors

  • Downlight reflectors

  • Commercial lighting components

  • Stage-lighting reflectors

  • Street-light reflector components

  • Lampshades and optical housings

  • Solar thermal reflector components

  • Secondary solar reflectors

  • Compatible solar concentrator components

  • Interior decorative wall panels

  • Column covers

  • Ceiling decoration

  • Storefront decoration

  • Hotel and retail interiors

  • Cosmetic displays

  • Jewelry showcases

  • Exhibition displays

  • Signboards and light boxes

  • Decorative nameplates

  • Compatible equipment reflector panels

Discuss Your Reflector Application

Production Process

Depending on the required product, manufacturing can include aluminum-sheet preparation, surface grinding or brightening, polishing, cleaning and degreasing, anodizing or vacuum-deposited reflective treatment, protective-layer application, surface inspection, protective-film lamination, cutting and packaging.

The production route varies between polished, anodized and enhanced reflective grades, so the finished optical properties should be confirmed for the actual supplied surface rather than inferred only from the process name.

Quality Control

Inspection can include alloy and thickness verification, sheet dimensions, reflectance measurement, mirror-surface uniformity, visual surface inspection and dimensional tolerances according to the agreed order specification.

Where optical performance is critical, the inspection plan should identify the reflectance type, measuring instrument, wavelength or spectral range and acceptance value.

For solar reflector applications, additional requirements can include solar-weighted reflectance, specular reflectance and environmental durability testing where specified.

For decorative mirror products, approved color, mirror clarity, gloss and appearance samples can be retained for batch comparison.

Export Packaging

Mirror aluminum requires careful surface protection because scratches and pressure marks can be highly visible on reflective finishes.

The current packing specification includes PE protective film on the mirror surface, EPE foam separation between sheets and protective corner materials to reduce handling damage.

Sheet stacks can be wrapped with moisture-resistant packaging and secured on export pallets according to size, weight and transportation requirements.

Pallet labels can identify mirror type, published reflectivity grade, color, thickness, size, quantity and production batch according to the agreed packing list.

Information Required for a Quotation

To receive an accurate material recommendation and quotation, please provide as much of the following information as possible:

  • Required alloy: 1050, 1060, 1100, 3003 or specified grade

  • Required temper, if specified

  • Thickness and tolerance

  • Sheet width and length

  • Polished, anodized or vacuum/PVD-enhanced mirror surface

  • Required total reflectance

  • Required specular reflectance, if applicable

  • Required diffuse reflectance, if applicable

  • Solar-weighted reflectance requirement, if applicable

  • Required wavelength range or optical test method

  • Silver or decorative mirror color

  • Surface hardness requirement, if applicable

  • Flatness or surface-roughness requirement, if applicable

  • Protective-film requirement

  • Lighting, solar, decoration, display or other final application

  • Reflector or component drawing

  • Required bend radius

  • Stamping or deep-forming requirement

  • Indoor or outdoor exposure

  • Required optical or environmental test reports

  • Order quantity

  • Destination country or delivery port

  • Special inspection, labeling or packing requirements

Send Your Mirror Aluminum Specifications

FAQ

What is high reflective mirror aluminum sheet?

It is aluminum sheet with a polished, anodized or enhanced reflective surface designed to reflect a high proportion of incident light for decorative or technical applications.

What reflectivity grades are available?

The current published grades are 80%, 85%, 90% and 95%. The applicable measurement method should be confirmed for each ordered surface.

Does 95% reflectivity always mean 95% specular reflection?

No. Total, hemispherical, diffuse and specular reflectance describe different optical characteristics. A 95% requirement should identify exactly which reflectance value is required.

Which mirror aluminum is suitable for LED lighting reflectors?

The correct surface depends on the luminaire optical design. Highly specular surfaces can be suitable for directional reflectors, while semi-specular or diffuse surfaces may be preferred for wider light distribution.

Is 90% reflectivity sufficient for a lighting reflector?

It can be suitable for some designs, but reflector efficiency depends on total reflection, specularity, reflector geometry and the light source. The luminaire designer should define the optical requirement.

Can 95% mirror aluminum be used for solar concentrators?

A 95% published reflectivity value alone does not qualify a material for a solar concentrator. Solar-weighted and specular reflectance, angular scattering and environmental durability may also need to be verified.

What is the difference between polished and anodized mirror aluminum?

Polished aluminum obtains its mirror appearance primarily from mechanical surface finishing. Anodized mirror aluminum additionally uses a controlled oxide layer to provide surface protection.

What is vacuum-coated mirror aluminum?

It uses a vacuum-deposited or similar enhanced reflective layer system to achieve optical properties that can be higher than conventional polished or standard anodized aluminum.

Is mirror aluminum as clear as a household glass mirror?

Not necessarily. Household glass mirrors are optimized for image reflection, while mirror aluminum may be optimized for light reflection, formability, low weight or decorative metallic appearance.

Is mirror aluminum lighter than glass mirror?

The final weight depends on the thickness and construction of each product. Aluminum can enable lightweight reflector structures, but a fixed weight ratio should not be assumed without comparing actual component designs.

Can mirror aluminum sheet be bent?

Yes, for compatible alloy, temper and thickness combinations. The reflective surface and bend radius should be evaluated because severe forming can affect appearance and optical properties.

Can mirror aluminum be deep drawn into reflectors?

Some mirror aluminum constructions can be formed into reflector shapes, but deep-drawing suitability depends on substrate temper, coating system and forming depth. Representative trials are recommended.

Will reflectivity remain unchanged after forming?

Not necessarily. Forming can change local surface geometry and optical distribution, especially in highly specular materials. Post-forming optical requirements should be verified where critical.

Can mirror aluminum be used outdoors?

Outdoor suitability depends on the reflective layer, protective coating, anodizing, climate, humidity, pollution and cleaning conditions. The specific mirror construction should be qualified for the intended environment.

What colors are available?

Published colors include silver, gold, bronze, rose gold, black and blue, with customized decorative colors available according to the surface-treatment process.

How should the mirror surface be protected during processing?

Protective film should remain on the decorative surface during compatible cutting and handling where possible. Clean gloves, clean tooling and non-abrasive contact surfaces help reduce scratching.

What sheet sizes are available?

Standard sizes include 1000×2000mm, 1220×2440mm and 1250×2500mm. Custom dimensions can be discussed according to production capability.

What thicknesses are available?

The current published thickness range is 0.3mm to 3.0mm.

Can I request an optical test report?

Required optical documentation should be specified during quotation, including the reflectance property, test method and acceptance value needed for the project.

Can I request samples before bulk production?

Sample availability can be confirmed according to alloy, thickness, mirror type and reflectivity grade. Optical and forming trials are recommended for new reflector applications.

What information should I provide for a quotation?

Please provide alloy, thickness, sheet size, mirror surface type, required reflectance and test method, color, forming requirements, final application, protective-film requirement, quantity and destination.

Contact Us for Samples & Mirror Sheet Pricing

Previous: 
Next: 

Product Category

Consult Us To Get Your Customized Aluminum Solution

We help you specify and source the coated aluminum you need, on time and within budget.

Products

Application

Quick links

Follow Us

Contact Us

    joey@cnchangsong.com
    +86-18602595888
   Building 2, Zhixing Business Plaza, No.25 North Street, Zhonglou District, Changzhou City, Jiangsu Province, China
    Chaoyang road, Konggang economic development area, Lianshui, Huai'an city, Jiangsu,China
© COPYRIGHT 2026 CHANGZHOU DINGANG METAL MATERIAL CO., LTD. ALL RIGHTS RESERVED.