1060/3003 Prepainted Narrow Aluminum Strip Coil
You are here: Home » Brushed Surface » By Shape » Prepainted Aluminum Strip » 1060/3003 Prepainted Narrow Aluminum Strip Coil

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

1060/3003 Prepainted Narrow Aluminum Strip Coil

Prepainted 1060/3003 aluminum strip coil for roller shutters, decorative trim, lamp housings and hardware stamping. Available in 0.2-2.0mm thickness, 10-300mm slit widths and PE or PVDF coatings.
Availability:
Quantity:

Prepainted Aluminum Strip Coil for Roller Shutters, Trim and Stamping

Prepainted aluminum strip coil is precision slit from full-width color coated aluminum coil for roller shutter doors, decorative edge trim, lamp housings, hardware stamping and other continuous forming applications requiring narrow strip dimensions, controlled edges and a factory-finished surface.

Available substrate options include 1060 aluminum for high-formability applications and 3003 aluminum where additional strength and rigidity are required. The published supply range covers 0.2mm to 2.0mm thickness and slit widths from 10mm to 300mm.

PE polyester and PVDF coating options are available with matte, medium-gloss, high-gloss, solid-color, metallic and wood-grain finishes. Mini coils can be configured according to the customer's decoiler, stamping press, roller-shutter line or other automatic production equipment.

Request a Quotation

Technical Specifications

Item

Published / Available Specification

Purchasing Consideration

Product Type

Prepainted / color coated narrow aluminum strip coil

For continuous forming, stamping and decorative applications

Base Alloy

1060 / 3003

Select according to forming severity, strength and final application

Temper

According to application; 1060 O available for high-formability requirements

Temper should match bending, stamping, drawing and finished rigidity

Thickness Range

0.2mm–2.0mm

Confirm thickness tolerance according to forming equipment

Slitting Width Range

10mm–300mm

Custom narrow widths subject to thickness, master coil and slitting feasibility

Published Width Tolerance

±0.1mm

Confirm for the exact strip width and thickness before production

Edge Quality

Precision slit edge

Specify numerical burr limit where automatic feeding or stamping is sensitive to edge condition

PE Coating Thickness

Published range: 18–28μm

Confirm primer/topcoat construction, test method and tolerance

PVDF Coating Thickness

Published range: 28–40μm

Confirm full coating construction and required exterior performance

Surface Finish

Matte / medium gloss / high gloss

Published matte reference 20–30; confirm gloss measurement method and tolerance

Color Options

RAL solid colors, metallic colors and wood-grain finishes

Physical sample approval recommended for appearance-critical orders

Published PE Salt-Spray Reference

500 hours

Confirm test standard, specimen preparation and acceptance criteria

Published PVDF Salt-Spray Reference

1000 hours

Confirm applicability to the exact coating system and production batch

Mini Coil Weight

50–500kg published customization range

Match decoiler capacity, coil ID, OD and handling requirements

Supply Form

Precision slit mini coil / narrow strip coil

Specify winding direction and coated-side orientation where required

Published dimensions, coating thicknesses and salt-spray values should be confirmed against the exact alloy, temper, strip width, coating formulation, test method and ordered construction before they are used as acceptance criteria.

Get Strip Specifications & Pricing

Precision Slitting for Automatic Production Lines

Minimum 10mm Narrow Strip

The published minimum slit width is 10mm. Narrow-width capability is useful for decorative profiles, lamp components, small stamped parts and other applications that do not require full-width coil.

Width Tolerance

The current published width tolerance is ±0.1mm. Where the strip feeds directly into dies, guide rails or roll-forming equipment, the required numerical tolerance should be confirmed for the exact width and gauge.

Edge Burr

Edge quality can affect automatic feeding, stamping, forming and operator handling. Buyers with sensitive equipment should define an acceptable maximum burr height rather than relying only on a general smooth-edge description.

Camber and Strip Tracking

Excessive strip camber can cause tracking problems on narrow-strip production lines. Where the equipment is sensitive to lateral movement, the maximum permitted camber over an agreed measuring length should be specified.

Winding Quality

Stable rewinding helps reduce telescoping and uneven feeding. Coil ID, OD, winding tension, strip orientation and maximum coil weight should be matched to the customer's decoiler.

1060 vs 3003 Aluminum Strip

Selection Factor

1060 Aluminum

3003 Aluminum

Alloy Type

Commercially pure aluminum

Aluminum-manganese alloy

Formability

High formability, especially in soft temper

Useful formability with greater alloy strength

Relative Strength

Lower than 3003

Higher than 1060 due to manganese alloying

Typical Selection

Deep drawing, bending and highly formed decorative components where compatible

Roller shutters, outdoor trim and components requiring additional rigidity

Final alloy and temper selection should be based on drawing depth, bend radius, stamping severity, profile rigidity and coating flexibility rather than alloy name alone.

PE vs PVDF Coating

Selection Factor

PE Polyester

PVDF

Published Film Range

18–28μm

28–40μm

Typical Application

General decorative, indoor and suitable exterior applications

More demanding exterior applications where higher UV and weathering performance are required

Published Salt-Spray Reference

500 hours

1000 hours

Application Review

Confirm whether the selected polyester system meets the intended exposure

Confirm PVDF resin system, film build and exposure requirements for the project

Salt-spray exposure is an accelerated laboratory reference and should not be directly converted into a fixed outdoor service life. Actual performance depends on coating formulation, UV exposure, humidity, coastal salt, industrial pollutants, forming damage and maintenance conditions.

Coating Performance for Bending and Stamping

T-Bend and Flexibility

Where the strip will be tightly bent or roll formed, an agreed T-bend or flexibility requirement can be specified to evaluate the coating after deformation.

Coating Adhesion

Cross-cut, tape or other agreed adhesion testing can be included where coating integrity after slitting and forming is important.

Coating Cure

Where curing quality is critical, MEK or another agreed solvent-resistance test can be specified according to the selected paint system.

Deep Drawing

1060 in a soft temper can be considered for compatible drawing operations, but drawing depth, die radius, lubricant, blank geometry and coating flexibility should be validated on the actual part before commercial production.

Mini Coil Configuration

The published mini-coil weight range is 50kg to 500kg. Smaller coils can be useful for compact roller-shutter lines, stamping presses, lamp-component production and workshops where large master coils are not practical.

The required coil inner diameter, maximum outside diameter and weight should be specified according to the customer's decoiler or coil stand rather than selected only by total coil weight.

Where coated-side orientation or downstream feeding direction matters, the required winding direction should also be stated before production.

Production Process

Typical production flow includes full-width prepainted coil inspection, uncoiling, surface inspection, precision slitting, controlled-tension rewinding, edge and surface protection, wrapping, palletizing and export packing.

Critical control points for narrow-strip orders can include master-coil surface condition, slit width, edge burr, camber, coating damage at the slit edge, winding tightness and coil telescoping.

Main Applications

Roller Shutter Doors and Gates

Precision slit strip can be supplied for compatible automatic roller-shutter doors, garage shutter components, rolling gates and decorative shutter profiles where alloy, temper, width and coating match the forming equipment.

Decorative Edge Trim

Narrow prepainted strip can be used for furniture edging, cabinet trim, ceiling closing profiles, wall decorative strips, security-door decoration and compatible architectural details.

Lamp Housings

Suitable alloy and temper combinations can be considered for LED downlight housings, landscape-light casings, advertising light-box trim and other lighting components produced by stamping or forming.

Hardware Stamping

The strip can be supplied for small decorative stamped components, fence trim, appliance trim and similar parts where strip width, thickness and surface finish match the die and feeding equipment.

Construction Accessories

Additional applications can include roof-edge closing strips, insulation-board wrapping profiles and other narrow decorative or protective building components.

Discuss Your Strip Application

Color, Gloss and Surface Approval

RAL solid colors, metallic finishes and wood-grain effects can be discussed according to production feasibility and order quantity.

For repeat production, an approved physical master sample is recommended for color and gloss comparison. Color acceptance should be based on an agreed tolerance where visual consistency is contract-critical.

Matte, medium-gloss and high-gloss surfaces can behave differently during stamping and handling, so the finish should be evaluated together with forming requirements.

RoHS, REACH and Coating Documentation

Where RoHS, REACH or other chemical-compliance documentation is required, buyers should identify the destination market and exact coating system before production.

Available declarations or test reports should correspond to the actual paint formulation, color and supplied material rather than being assumed from the aluminum substrate alone.

For lighting, furniture or indoor decorative applications, any additional restricted-substance, odor or surface-safety requirements should be stated during quotation.

Quality Control

Inspection can include aluminum thickness, slit width, width tolerance, edge burr, camber, coating thickness, surface appearance, color, gloss, winding condition and coil dimensions according to the agreed purchase specification.

Where coating performance is critical, buyers can specify agreed adhesion, T-bend, hardness, solvent-resistance or salt-spray tests together with the applicable method and acceptance criteria.

For stamping and automatic feeding, sample production-line testing is recommended where strip tracking, burr or coating deformation may affect the finished part.

Export Packaging

Narrow mini coils can be individually wrapped with protective paper or film, separated to reduce surface contact and secured on export pallets according to coil dimensions and transportation requirements.

Edge and end-face protection can be added where required to reduce handling damage to slit edges and coated surfaces.

Pallet labels can identify alloy, temper, thickness, strip width, color reference, coating system, batch number and net weight according to the agreed shipping requirements.

Where wood-packaging documentation is required by the destination market, the applicable pallet treatment and shipping documents should be confirmed before dispatch.

Documentation

Available order documentation can include material certificates, coating information, inspection records, MSDS or safety information for the selected coating, commercial invoice and packing list according to the confirmed order requirements.

Where project-specific salt-spray, coating adhesion, chemical-compliance or other test reports are required, these should be identified before production so applicability to the ordered material can be reviewed.

Information Required for a Quotation

To receive an accurate quotation and production review, please provide as much of the following information as possible:

  • Required alloy: 1060, 3003 or another specified grade

  • Required temper

  • Thickness and tolerance

  • Slit width and width tolerance

  • Maximum edge-burr requirement, if applicable

  • Camber requirement, if applicable

  • PE or PVDF coating

  • Required coating thickness

  • Color or approved physical reference

  • Matte, medium-gloss or high-gloss finish

  • Metallic or wood-grain requirement, if applicable

  • Required T-bend, adhesion, hardness or salt-spray test

  • Final application: roller shutter, trim, lamp housing, stamping or other use

  • Part or profile drawing

  • Bend radius, drawing depth or forming requirement

  • Coil inner diameter

  • Maximum coil outside diameter

  • Preferred or maximum mini-coil weight

  • Required winding direction

  • Production-line or decoiler information

  • RoHS, REACH or other documentation requirements

  • Order quantity

  • Destination country or delivery port

  • Special labeling or packaging requirements

Send Your Aluminum Strip Specifications

FAQ

What is prepainted narrow aluminum strip coil?

It is color coated aluminum coil that has been precision slit into narrow widths for feeding into roller-forming, stamping, drawing or decorative-profile production equipment.

What is the narrowest published slit width?

The current published minimum width is 10mm. Final feasibility depends on strip thickness, alloy, temper, coating and the required tolerance.

What is the published width tolerance?

The current product information lists ±0.1mm. Buyers with precision feeding equipment should confirm this tolerance for the exact strip width and gauge.

Why should I specify an edge-burr limit?

Burr can affect automatic feeding, die wear, forming quality and handling. A numerical burr limit provides a clearer acceptance criterion than describing the edge only as smooth.

Is this strip suitable for roller shutter doors?

It can be supplied for compatible roller-shutter profiles when alloy, temper, thickness, strip width, coating flexibility and coil dimensions match the forming equipment.

Should I choose 1060 or 3003 aluminum?

1060 provides high formability, particularly in soft temper, while 3003 generally provides greater strength and rigidity. Selection should be based on the actual part and forming process.

Can 1060 O strip be deep drawn?

1060 O can be considered for compatible deep-drawing applications because of its high ductility, but drawing depth, die design, lubrication and coating performance should be validated on the finished part.

Should I choose PE or PVDF coating?

PE is suitable for many general decorative and exterior applications, while PVDF can be considered where higher UV, weathering or environmental resistance is required.

What are the published coating thicknesses?

The current product information lists PE at 18–28μm and PVDF at 28–40μm. Final film build should be confirmed against the selected coating system.

What do the 500-hour and 1000-hour salt-spray values mean?

They are published performance references for PE and PVDF versions respectively. If salt-spray resistance is an order requirement, the test standard, sample preparation and acceptance criteria should be defined before production.

Can matte aluminum strip be supplied?

Yes. Matte, medium-gloss and high-gloss finishes can be discussed. The required gloss value and measurement method should be confirmed where appearance is critical.

Can metallic and wood-grain finishes be supplied?

Metallic colors and wood-grain finishes can be discussed according to coating process, production feasibility, order quantity and approved sample requirements.

What mini-coil weights are available?

The published customization range is 50kg to 500kg. The final coil should also be defined by inner diameter, outside diameter and the customer's decoiler capacity.

What is the minimum order quantity?

The current published minimum trial-order reference is 1 ton. Final MOQ can depend on alloy, strip width, coating system, color and customization requirements.

Can RoHS or REACH documentation be provided?

Available compliance documentation can be reviewed for the selected coating formulation and supplied material. Buyers should state the destination market and required documentation before production.

Can I request samples before bulk production?

Sample availability can be confirmed according to alloy, temper, width, coating and color. Production-line trials are recommended for new stamping dies, roller-shutter profiles or deep-drawn components.

What information should I provide for a quotation?

Please provide alloy, temper, thickness, slit width, tolerance, burr requirement, coating, color, gloss, coil ID, coil weight, part drawing, forming process, quantity and destination.

Contact Us for Samples & Strip Coil Pricing

Previous: 
Next: 

Product Category

Consult Us To Get Your Customized Aluminum Solution

We help you specify and source the coated aluminum you need, on time and within budget.

Products

Application

Quick links

Follow Us

Contact Us

    joey@cnchangsong.com
    +86-18602595888
   Building 2, Zhixing Business Plaza, No.25 North Street, Zhonglou District, Changzhou City, Jiangsu Province, China
    Chaoyang road, Konggang economic development area, Lianshui, Huai'an city, Jiangsu,China
© COPYRIGHT 2026 CHANGZHOU DINGANG METAL MATERIAL CO., LTD. ALL RIGHTS RESERVED.