3003 H24 Wood Grain Color Coated Aluminium Stripe for Exterior Roller Blinds

Model:
PPAL
Brand:
DINGANG

Availability:

Quantity:



Inquire Add to Basket

Product Description

3003 H24 Wood Grain Color Coated Aluminium Stripe for Exterior Roller Blinds

I Product Brief Introduction

Custom-manufactured as dedicated raw material for exterior roller blinds, louvered shutters and venetian blind slats, this color coated aluminium stripe adopts prime 3003 H24 Al-Mn alloy as the core substrate. Processed via high-precision continuous rolling and thermal transfer wood grain coating, it integrates lifelike natural wood visual texture with the durable mechanical properties of aluminum alloy.

The 3003 H24 temper delivers balanced tensile strength and ultra-high bendability, which prevents cracking during repeated cold bending, edge curling and blind roll forming, perfectly fitting automated blind production lines. Compared with natural solid wood, the thermal transfer coated surface eliminates common defects including moisture swelling, mildew, deformation and termite infestation. The finished wood grain pattern reaches over 98% simulation fidelity, compatible with modern minimalist, Nordic and retro architectural interior & exterior decoration styles.

All surface coatings pass rigorous QUV accelerated weathering tests, featuring outstanding UV resistance, scratch resistance and chemical corrosion resistance. It maintains a gloss retention rate above 95% after long-term outdoor exposure, with no peeling, chalking or color fading. Meeting RoHS and REACH international eco-friendly standards, this non-toxic, fully recyclable aluminium stripe is the preferred raw material for long-service-life roller blinds used in residential balconies, commercial office buildings, hotel exterior sunshade systems and industrial ventilation shutters.

微信图片_20260505194414_131_55

II Technical Specifications Table

Parameter Category	Details
Product Name	3003 H24 Wood Grain Color Coating Aluminium Stripe for Shutter Windows
Alloy Grade	3003 H24 (Al: 96.7-99.0%, Mn: 1.0-1.5%, Cu: 0.05-0.20%)
Mechanical Properties	- Tensile Strength: 180-220MPaield Strength: 150-180MPa- Elongation: ≥12%
Thickness Range	0.3mm - 2.0mm (Customizable)
Width Range	10mm - 100mm (Standard: 20/30/40mm; Custom cuts available)
Coating Process	Thermal transfer wood grain + Electrophoresis primer
Coating Performance	- Film Thickness: Composite film ≥26μm (Oxide film ≥6μm + Paint film ≥20μm) Spray Resistance: ≥1000 hours (Grade 9.8+)- UV Resistance: ≥8 years (QUV accelerated aging test)- Adhesion: Level 1 (no peeling/cracking)
Surface Finish	Wood grain (Oak/Walnut/Pine/etc.; Custom pattern matching available)
Color Fastness	≥Grade 4-5 (GB/T 1865-2009)
Execution Standards	GB/T 5237.4-2017, ASTM B209M, ROHS
Tolerance	Thickness: ±0.02mm; Width: ±0.1mm
Packaging	Waterproof paper + Wooden pallet (1000pcs/bundle or custom)

III Application Scope

Residential Buildings: Bedroom windows, bathroom windows, balcony shutters, kitchen ventilating windows (moisture-proof and easy to clean)
Commercial Buildings: Office buildings, shopping malls, hotels, restaurant facades and interior partitions
Industrial Spaces: Factory workshops, clean rooms, laboratory ventilation shutters (corrosion-resistant and dust-proof)
Special Scenarios: Coastal buildings (anti-salt spray corrosion), high-altitude buildings (wind pressure resistance), sunrooms (UV protection)

IV Material Comparison Advantages

Comparison Dimension	3003 H24 Wood Grain Aluminium Stripe	Solid Wood Strip	Zinc Steel Strip
Weight	Light (2.7g/cm³) - Easy installation	Medium (0.6g/cm³ but bulky)	Heavy (7.85g/cm³) - High labor cost
Weather Resistance	Excellent (no rust/deformation)	Poor (moisture absorption/mildew)	Average (prone to rust)
Service Life	15-20 years	3-8 years	5-10 years
Maintenance Cost	Low (wipe with neutral detergent)	High (regular painting/waterproofing)	Medium (anti-rust treatment)
Decoration Effect	High wood simulation + color stability	Natural but color fading	Single color + poor texture
Environmental Friendliness	RoHS compliant, recyclable	Deforestation risk	Environmental pollution in production
Cost-Effectiveness	High (balance of performance and price)	Low (high cost + short life)	Medium (low initial cost + high maintenance)

V FAQ (Frequently Asked Questions)

1.Q: Will the wood grain coating fade over time?

A: No. The product adopts high-durability thermal transfer coating with UV-resistant additives. Passed 1000-hour QUV accelerated aging test, the color fading rate is ≤5% after 8 years of outdoor use.

2.Q: Can it be customized to specific sizes and wood patterns?

A: Yes. Thickness (0.3-2.0mm) and width (10-100mm) can be customized. We offer over 20 standard wood grain patterns (oak/walnut/pine) and support custom pattern matching with sample provided.

3.Q: Is it suitable for bathroom or coastal areas?

A: Absolutely. The 3003 H24 alloy and thickened coating achieve salt spray resistance ≥1000 hours, effectively resisting moisture, humidity and salt corrosion, ideal for bathrooms, coastal buildings and other harsh environments.

4.Q: How to maintain the aluminium stripe?

A: Regular maintenance is simple: wipe with a soft cloth dipped in neutral detergent to remove dust and stains. Avoid using abrasive cleaners or sharp tools to prevent coating damage.

5.Q: What is the installation method?

A: Compatible with standard shutter window installation: slot insertion, screw fixation or clip-on assembly. It can be cut on-site according to actual needs, and the lightweight design reduces installation difficulty.

6.Q: Does it have impact resistance?

A: The 3003 H24 temper provides moderate strength (tensile strength 180-220MPa), which can withstand daily slight impacts. For severe impact, the bent slats can be easily restored or replaced individually.

-------------------------------------------------------------------------------------------------------------------------------