| Availability: | |
|---|---|
| Quantity: | |
High gloss black prepainted aluminum coil is supplied for roll forming into corrugated roofing sheets, trapezoidal roof panels, architectural roofing, flashing and other exterior metal components requiring a lightweight aluminum substrate and a factory-applied black finish.
The current product range includes AA3003-H14 and AA5052 aluminum options with common thicknesses of 0.68mm, 0.75mm, 0.8mm and 1.0mm. PE polyester and PVDF coating systems are available according to the required appearance, budget and exterior exposure.
A 1200mm flat feed width can be supplied for a roofing profile designed to achieve approximately 1160mm effective installed coverage. Because effective width depends on rib geometry, corrugation depth, side-lap design and roll-forming tooling, buyers should confirm the actual profile drawing before production.
For exterior roofing, alloy, temper, thickness, coating construction, gloss, color tolerance, forming radius and panel profile should be treated as one coordinated material specification rather than selected independently.
Request High Gloss Black Roofing Coil Pricing
Item | Available Specification | Roofing Notes |
Product | High Gloss Black Prepainted Aluminum Coil | For corrugated, trapezoidal and compatible architectural roofing profiles |
Primary Alloy | AA3003-H14 | Practical balance of formability, moderate strength and corrosion resistance |
Alternative Alloy | AA5052 | Higher-strength option; final temper should be confirmed according to forming requirements |
Common Thicknesses | 0.68 / 0.75 / 0.8 / 1.0mm | Custom gauges can be discussed according to production capability |
Feed Width | 1200mm | Flat coil width entering the roofing roll former |
Profile Reference | 1160mm effective coverage | Must be confirmed against the actual profile drawing and overlap geometry |
Cover-to-Feed Ratio | Approximately 96.7% | Reference only; the width difference is consumed by profile geometry and lap, not necessarily scrap |
Color | High Gloss Jet Black | RAL or physical sample matching can be discussed |
Gloss | High Gloss | Numerical 60° gloss target should be specified for repeat orders |
Coating | PE Polyester / PVDF | Select according to exposure and appearance requirements |
Top-Coat Thickness | Project-specific | Define primer and topcoat dry-film thickness in the purchase specification |
Back Coating | Project-specific | Back-coat chemistry should match roof and condensation conditions |
Color Tolerance | Project-specific | Define ΔE and measurement method where appearance consistency is critical |
Protective Film | Optional | Useful where high-gloss surfaces require protection during profiling and transport |
Coil ID | Customized | Provide roll-former decoiler requirement |
Maximum Coil OD | Customized | Confirm equipment and container-loading limits |
Coil Weight | Customized | Match crane, forklift and decoiler capacity |
Typical Processing | Corrugation / Trapezoidal Roll Forming / Bending / Slitting | Machine compatibility should be verified with a trial |
Material Reference | ASTM B209 / EN 485 where applicable | For substrate requirements |
Coil-Coated Reference | EN 1396 where applicable | Relevant to coil-coated aluminum sheet and strip |
Feed width and effective coverage width describe two different stages of roofing production.
The 1200mm dimension refers to the flat width of the aluminum coil before it enters the corrugating or roll-forming equipment.
The 1160mm reference refers to the intended installed coverage of a specific formed roofing profile after ribs, corrugations and side-lap geometry are taken into account.
When a 1200mm flat strip becomes a 1160mm effective roof panel, part of the apparent width difference is consumed by the three-dimensional profile and side overlap. It should not automatically be treated as scrap or material loss.
Different corrugation and trapezoidal profiles can produce very different effective widths from the same 1200mm feed width. Provide the roll-former drawing, rib height, pitch and side-lap geometry before ordering.
Effective coverage is determined by much more than coil width.
Profile Parameter | Influence |
Rib Height | Higher ribs consume more flat strip width during forming |
Wave / Rib Pitch | Controls the number and spacing of profiles across the panel |
Corrugation Geometry | Changes the relationship between flat width and projected width |
Side Lap | Reduces installed effective coverage |
Edge Geometry | Can consume additional material for interlocking or overlap |
Profile Depth | Influences stiffness and material consumption across the cross-section |
AA3003-H14 provides a useful balance of formability, moderate strength and corrosion resistance for many profiled aluminum roofing applications.
3003-H14 can be roll formed into compatible corrugated and trapezoidal profiles where bending radii and tooling are properly designed.
The formed ribs or corrugations provide most of the panel's geometric stiffness, while the substrate contributes the underlying mechanical properties.
AA3003-H14 is a practical starting specification for roofing manufacturers requiring easier forming than higher-strength 5xxx alloys.
AA5052 provides greater strength and strong corrosion resistance and can be considered where the roofing profile, handling requirements or service environment call for a higher-strength aluminum substrate.
AA5052 should not be specified by alloy alone. The temper has a major influence on forming force, minimum radius and springback.
Where the roof profile contains tight folds or small-radius features, the selected 5052 temper should be tested on the actual roll-forming equipment before commercial production.
Thickness | Selection Consideration |
0.68mm | Light-to-medium roofing skin where profile geometry provides the required stiffness |
0.75mm | Intermediate gauge balancing material weight, formability and panel rigidity |
0.8mm | Practical gauge for many engineered aluminum roof profiles |
1.0mm | Provides additional material stiffness; verify roll-former and bending capacity |
The correct thickness should be selected according to panel profile, support spacing, wind pressure, span, roof slope and complete system design rather than material availability alone.
Discuss Alloy & Thickness Selection
High gloss black provides a reflective architectural appearance for modern roofs, cladding, fascia and matching exterior metalwork.
The term “high gloss” should be supplemented by a numerical 60° gloss target and tolerance when repeatable appearance is important.
A physical coated sample is recommended for final approval because gloss and coating chemistry can affect the perceived depth of black.
RAL references or customer physical samples can be used for compatible black color development. If RAL 9005 or another code is required, specify it explicitly in the purchase order.
Conventional black roofing generally absorbs more solar radiation than light-colored roofing.
A high-gloss surface does not automatically mean high solar reflectance. Solar reflectance depends primarily on pigment chemistry and coating formulation rather than visible gloss alone.
If the project requires a cool-roof black coating, request tested solar reflectance, thermal emittance and Solar Reflectance Index for the exact paint formulation.
The aluminum skin is not thermal insulation. Building heat transfer depends on insulation, air spaces, ventilation, roof assembly and thermal bridges.
Polyester coating provides a cost-effective finish for compatible residential, commercial and light-industrial roofing applications.
PE systems can support high-gloss black and other color programs where the required exterior durability matches the coating formulation.
Polyester weathering performance depends on resin type, pigment, coating thickness, UV exposure, rainfall, pollution and maintenance. A fixed lifetime should not be applied to every project.
PVDF fluoropolymer coatings can be considered for demanding architectural roofing where improved resistance to UV weathering, chalking and long-term color change is required.
A professional PVDF specification should identify the resin system, primer, topcoat dry-film thickness, pigment requirements and relevant coating tests.
Long-term coating performance depends on the exact formulation, color, location and exposure. Any warranty should refer to the approved coating system rather than a generic PVDF label.
For roofing procurement, the coating construction should identify pretreatment, primer, exposed topcoat and back coating.
The exposed-side dry-film requirement should be selected according to whether the project uses standard PE, HDP or a higher-performance PVDF system.
The reverse side can use a service coating selected for handling, condensation exposure and panel construction.
Prepainted aluminum is formed after coating, so paint flexibility must be compatible with the roof-profile geometry.
A T-bend or equivalent deformation test can be used to evaluate coating flexibility before roofing production.
Cross-hatch adhesion testing can provide a measurable requirement for coating bond to the pretreated aluminum substrate.
Where applicable to the paint chemistry, MEK double-rub testing can be used as a process-control indicator for coating cure.
Impact testing can help evaluate coating integrity after localized deformation.
Trial roofing sheets should be inspected after forming for paint cracking, flaking, exposed aluminum, scratches and unacceptable surface marking.
Roofing roll-forming stability depends on coil shape as well as thickness.
Edge wave and center buckle can affect finished panel appearance and tracking through the roll former.
Excessive longitudinal camber can cause tracking errors and inconsistent edge geometry during continuous roofing production.
Burrs, nicks and damaged edges should be controlled where material is slit to the final roll-former feed width.
Stable winding tension and aligned coil edges help reduce telescoping and feeding interruptions.
Aluminum and coated steel are different roofing substrates, each with advantages depending on design requirements.
Property | Prepainted Aluminum | Prepainted Steel |
Density | Approximately 2.7g/cm³ | Approximately 7.8g/cm³ |
Weight at Same Thickness | Significantly lower | Higher |
Substrate Rust | Does not form iron rust | Steel can rust if metallic and paint protection are compromised |
Strength at Same Gauge | Depends on aluminum alloy and temper | Often higher depending on steel grade |
Marine Corrosion | Can provide good performance with suitable alloy and coating | Depends heavily on metallic coating, paint system and edge protection |
Thermal Expansion | Higher than steel | Lower than aluminum |
Roof-System Design | Must account for alloy, thickness, profile and expansion | Must account for steel grade, coating mass, profile and corrosion protection |
The lower density of aluminum does not mean a 0.8mm aluminum roofing panel automatically has the same structural capacity as a 0.8mm steel panel. Material strength, elastic modulus and profile geometry differ.
Aluminum does not form iron oxide rust, but it can still experience corrosion under unsuitable chemical or galvanic conditions.
Neither aluminum nor steel should be assigned a fixed roof lifetime without considering coating, fasteners, installation, environment and maintenance.
Aluminum can be attractive for humid and coastal roofing projects because it does not rely on an iron substrate, but the complete system still requires proper corrosion design.
Demanding marine exposure may justify a higher-performance coating and careful control of scratches and exposed cut edges.
Direct contact between aluminum and incompatible dissimilar metals in the presence of moisture can create galvanic corrosion. Fasteners and adjacent materials should be selected accordingly.
Marine salts and industrial deposits should not be allowed to accumulate indefinitely on coated roofing surfaces.
High gloss black prepainted aluminum coil can be roll formed into compatible sinusoidal or corrugated roofing profiles for residential, agricultural, commercial and light-industrial buildings.
The actual effective coverage must be calculated from the customer's corrugation geometry and side-lap requirement.
Trapezoidal profiles provide deeper ribs and increased geometric stiffness and are widely used on factories, warehouses and commercial buildings.
Panel span and wind capacity must be calculated from the complete profile and attachment system rather than inferred from the aluminum coil alone.
Selected aluminum gauges can also be used in compatible standing seam roofing systems, provided the alloy, temper, seam geometry and seaming equipment are suitable for the application.
Standing seam panel widths are defined by a different profile geometry, so the 1200mm-to-1160mm reference should only be used for the specific corrugated or profiled roof design for which it was developed.
Wind resistance depends on panel width, seam type, clips, clip spacing, fasteners and roof substrate.
Matching high gloss black aluminum can be fabricated into ridge caps, valley flashing, eave trim, fascia, parapet caps and other compatible roof details.
Using matching coil for roof sheets and accessories can improve visual consistency when color and gloss are controlled to the same approved standard.
Compatible aluminum coil can also be fabricated into gutters, downspouts and drainage accessories where the gauge and temper meet the forming requirements.
Gutter material specifications should be selected separately from roofing-panel specifications because bending geometry and required strip widths differ.
High gloss black prepainted aluminum can be used for compatible wall cladding, decorative profiles and architectural exterior elements where the complete panel system provides the required stiffness and attachment performance.
EN 1396:2023 covers coil-coated wrought aluminum and aluminum-alloy sheet and strip for general applications and can be used as a relevant reference for prepainted roofing aluminum where specified.
The purchase specification should still identify alloy, temper, thickness, width, coating type, color, gloss, coating construction and required quality tests.
Inspection Item | Recommended Verification |
Alloy & Temper | Verify against the approved purchase specification |
Thickness | Verify nominal gauge and agreed tolerance |
Feed Width | Verify 1200mm or approved machine input width |
Effective Coverage | Verify the finished panel against the approved profile drawing |
Flatness | Inspect edge wave and center buckle |
Camber | Measure where roll-former tracking requires a defined limit |
Slit Edge | Inspect burrs, nicks and damage |
Color | Compare black finish against approved physical master |
ΔE | Measure where instrumental color tolerance is contractual |
Gloss | Verify against the approved 60° gloss range |
Coating Thickness | Measure primer, exposed coating and back coat as specified |
T-Bend | Evaluate coating flexibility for profile forming |
Adhesion | Evaluate using agreed cross-hatch or equivalent method |
MEK Resistance | Evaluate paint cure where applicable |
Impact Resistance | Verify where specified |
Surface Appearance | Inspect scratches, dents, streaks and coating defects |
Winding Quality | Inspect telescoping, loose wraps and edge alignment |
A representative roll-forming trial is recommended whenever a new alloy, temper, gauge, coating system or roof profile is introduced.
The trial should use the customer's actual roofing machine, normal line speed and approved profile tooling.
Finished panels should be checked for effective width, profile accuracy, edge wave, springback, coating cracking, scratches and surface distortion.
If 1200mm feed width is expected to produce 1160mm effective coverage, this dimension should be verified during the trial before the bulk order is released.
Request Material for Roll-Forming Trials
Prepainted aluminum coils should be packed to protect the high-gloss painted surface, coil edges and winding geometry during long-distance transportation.
Coil orientation can be selected according to coil dimensions, loading method and customer unloading equipment.
Water-resistant wrapping, moisture-resistant paper and suitable protective materials can be used to reduce exposure to condensation during sea transportation.
Rigid edge protectors help reduce handling damage to slit edges and painted coil faces.
Loading plans should account for coil weight, support orientation, blocking, bracing and container payload limits.
Please provide the roofing roll-former brand or profile drawing, including rib height, pitch, side-lap geometry and required effective coverage.
Confirm whether 1200mm feed width and 1160mm effective coverage are fixed project requirements.
Specify AA3003-H14 or the required AA5052 temper, together with thickness, thickness tolerance and mechanical-property requirements.
Provide the required black color reference, numerical gloss, PE or PVDF coating system, top/back film thickness and any T-bend, adhesion or MEK requirements.
Provide coil ID, maximum OD, target coil weight, quantity, packaging requirements and delivery destination.
For coastal projects, identify the approximate project environment so that alloy, coating and fastener compatibility can be reviewed.
Send Your Roofing Profile Specification
It is aluminum coil coated with a factory-applied black organic finish and supplied for downstream roofing roll forming.
The current product lists AA3003-H14 and AA5052 aluminum options.
The current common specifications include 0.68mm, 0.75mm, 0.8mm and 1.0mm, with other gauges subject to production capability.
No. Effective width depends on the specific roofing profile, corrugation depth, rib pitch and side-lap design. The 1160mm value must be confirmed against the actual profile drawing.
Not necessarily. Much of the width difference is consumed by the three-dimensional roof profile and overlap geometry rather than removed as scrap.
No universal compatibility should be assumed. Provide the exact machine model or profile drawing before ordering.
AA3003 generally provides easier forming with moderate strength, while AA5052 provides higher strength and strong corrosion resistance. The final choice depends on profile geometry and temper.
Not automatically. Aluminum is lighter, but steel and aluminum have different strength and elastic-modulus characteristics. Finished roof performance depends on grade, thickness and panel geometry.
Aluminum does not form iron rust, but it can still corrode under aggressive chemical or galvanic conditions.
PE polyester is a cost-effective coating for compatible roofing projects, while PVDF is generally selected for more demanding long-term architectural weathering.
No fixed service life applies to every PE coating. Performance depends on resin formulation, color, exposure and maintenance.
No universal lifetime applies to every PVDF coating. Any warranty should refer to the actual approved coating system and project environment.
Not necessarily. Standard black pigments generally absorb significant solar energy. A tested cool-pigment formulation is required if high solar reflectance is a project requirement.
No universal percentage should be assumed. Building energy performance depends on coating reflectance, insulation, ventilation, climate, roof geometry and the complete building envelope.
Yes, where thickness, alloy, temper and feed width are compatible with the corrugating machine and profile design.
Yes. Trapezoidal profiles can be produced from compatible prepainted aluminum coil after the roll-forming requirements are confirmed.
Selected specifications can be evaluated for standing seam systems, but the seam profile, clips, seaming equipment and roof-system engineering must be assessed separately.
Yes, compatible gauges can be fabricated into matching fascia, flashing, ridge caps and architectural trim.
T-bend testing evaluates whether the coating remains attached during severe deformation similar to downstream forming operations.
Poor flatness or excessive camber can cause tracking problems, profile distortion and visual waviness on long roofing sheets.
Protective film can be discussed where the high-gloss surface requires additional protection during forming, transport or installation.
EN 1396:2023 is relevant to coil-coated aluminum sheet and strip for general applications and can be referenced where applicable.
A trial coil or sample is recommended for confirming feed width, effective profile width, coating flexibility and machine compatibility before bulk production.
Please provide profile drawing, feed width, effective width, alloy, temper, thickness, black color reference, gloss, coating type, coil dimensions, quantity and destination.
If you manufacture corrugated roofing sheets, trapezoidal panels, standing seam products, flashing or architectural roof components, send us your roll-forming profile and coil requirements.
Available options include AA3003-H14 and AA5052 aluminum, common 0.68–1.0mm thicknesses, high gloss black PE or PVDF coatings and 1200mm feed-width configurations for compatible roof profiles.
Products
Application
Quick links
Contact Us