1100 H14 0.70mm Thickness Aluminum Alloy Circle Sheet

You are here: Home » Brushed Surface » By Shape » Prepainted Aluminum Circle » 1100 H14 0.70mm Thickness Aluminum Alloy Circle Sheet

Share to:

1100 H14 0.70mm Thickness Aluminum Alloy Circle Sheet

Name: 1100 H14 0.70mm Thickness Aluminum Alloy Circle Sheet
Brand: DINGANG
Rating: 5.0 (48 reviews)

Dingang 1100 H14 0.70mm aluminum circle is a half-hard blank for cookware lids, shallow forming, stamping and spinning, supplied with custom diameters, clean edges and consistent surface quality.

Model:
Aluminum Disks
Brand:
DINGANG

Availability:

Quantity:



Inquire Add to Basket

Product Description

1100 H14 0.70mm Aluminum Circle for Cookware and Forming

1100 H14 0.70mm aluminum circle is a half-hard aluminum blank designed for cookware covers, lids, shallow-formed kitchenware, stamped components, spinning parts and other applications requiring a practical balance between formability and shape stability.

AA1100 is a commercially pure aluminum alloy with good corrosion resistance, thermal conductivity and workability. H14 temper provides higher rigidity than fully annealed O temper while retaining suitable forming performance for controlled shallow drawing, pressing, bending and spinning operations.

Dingang supplies 0.70 mm 1100-H14 aluminum circles in custom diameters for cookware manufacturers, kitchenware factories and industrial forming applications. Diameter tolerance, edge condition, surface quality and packing can be confirmed according to the production line and finished component.

Request 1100 H14 Aluminum Circle Price

1100 H14 0.70mm Aluminum Circle Specifications

Product	1100 H14 aluminum alloy circle / aluminum disc
Primary Alloy	AA1100
Temper	H14, half-hard
Nominal Thickness	0.70 mm
Available Diameter Range	20–1200 mm according to the listed production range; final diameter capability should be confirmed for each order
Available Alloy Range	1050, 1060, 1070, 1100, 3003
Available Temper Range	O, H12, H14
General Thickness Range	0.36–10 mm depending on alloy, temper, diameter and production requirements
Surface	Mill finish or application-specific surface requirement
Processing	Stamping, shallow drawing, pressing, spinning, bending and other suitable forming operations
Typical Applications	Cookware lids, pot covers, kettle components, shallow-formed utensils, stamped kitchenware and industrial circular parts
Custom Supply	Diameter, alloy, temper, thickness, surface and packing can be discussed according to order requirements

Why Choose 1100-H14 at 0.70mm Thickness?

Half-Hard Temper for Better Shape Stability

H14 is a strain-hardened half-hard temper. Compared with fully annealed O temper, H14 provides greater rigidity and better resistance to unwanted deformation while retaining useful formability for suitable shallow-forming operations.

Suitable for Cookware Covers and Lids

A 0.70 mm 1100-H14 aluminum circle is particularly suitable for light-gauge cookware components such as lids and covers where the finished part requires controlled forming together with enough stiffness to retain its shape.

Good Stamping and Pressing Performance

The material can be used for compatible stamping, pressing and shallow drawing operations. Tool design, forming depth, lubrication, blank diameter and process speed should be matched to the H14 temper.

Good Thermal Conductivity

AA1100 aluminum provides good thermal conductivity, making it practical for cookware, kitchenware and other applications where heat transfer is important.

Corrosion-Resistant Aluminum

The high aluminum content of AA1100 provides good resistance to normal atmospheric corrosion and makes the alloy suitable for a wide range of formed consumer and industrial products.

1100-H14 vs. O Temper Aluminum Circle

Feature	1100-H14	1100-O
Condition	Half-hard	Annealed / soft
Relative Rigidity	Higher	Lower
Formability	Suitable for controlled shallow forming, stamping and spinning	Preferred where higher ductility and deeper forming are required
Typical Cookware Use	Lids, covers and light-gauge formed components	Deeper drawn pots, pans and formed bodies where greater elongation is required
Shape Retention	Better for suitable thin-gauge components	Softer and easier to deform

Ask Which Temper Fits Your Forming Process

Typical Applications of 0.70mm 1100-H14 Aluminum Circle

Cookware lids and pot covers
Kettle covers and formed kettle components
Shallow cookware parts
Stamped kitchen utensils
Shallow-drawn round components
Spun aluminum parts
Lighting covers and reflectors
Other thin-gauge formed circular aluminum components

Available Aluminum Circle Alloy and Temper Range

Available Alloys	Available Tempers	General Thickness Range	General Diameter Range
1050, 1060, 1070, 1100, 3003	O, H12, H14	0.36–10 mm	20–1200 mm

Aluminum Circle Chemical Composition Reference

The following values summarize the alloy chemistry information associated with the available aluminum circle range. Final chemical composition should be confirmed against the agreed material specification and mill test certificate for the production order.

Alloy	Min. Al	Si	Fe	Cu	Mn	Mg	Zn	V	Ti	Other
1050	99.5	0.25	0.40	0.05	0.05	0.05	0.05	0.05	0.03	0.03
1060	99.6	0.25	0.35	0.05	0.03	0.03	0.05	0.05	0.03	0.03
1070	99.7	0.25	0.25	0.04	0.03	0.03	0.04	0.05	0.03	0.03
1100	99.0	Si + Fe: ≤0.95		0.05–0.20	≤0.05	—	≤0.10	—	—	Confirm by agreed specification
3003	Balance	≤0.60	≤0.70	0.05–0.20	1.00–1.50	—	≤0.10	—	—	Confirm by agreed specification

Temper and Mechanical Property Reference

Mechanical properties vary with alloy, thickness, production route and the material standard specified in the purchase order. The following ranges are production reference values from the existing aluminum circle product information; final requirements should be confirmed before ordering.

Temper	Referenced Thickness Range	Referenced Tensile Strength	Referenced Elongation
O	0.36–10 mm	60–100 MPa	≥20%
H12	0.5–10 mm	70–120 MPa	≥4%
H14	0.5–10 mm	85–120 MPa	≥2%

Important Quality Factors for 0.70mm Aluminum Circles

Thickness Consistency

For a nominal 0.70 mm product, consistent thickness helps maintain predictable press force, forming depth and finished-part rigidity. Required thickness tolerance should be agreed before bulk production.

Accurate Diameter

Circle diameter should match the tooling and finished component dimensions. Excess blank size increases material waste, while insufficient diameter can affect final flange and edge dimensions.

Clean Edge Quality

The blank edge should be suitable for handling and forming. Excessive burrs can create handling problems and may affect subsequent pressing, spinning or trimming operations.

Flatness

Controlled flatness helps automatic feeding, stacking and positioning during high-volume stamping or cookware production.

Surface Condition

The visible surface should be checked for deep scratches, dents, oxidation marks, contamination and other defects that may remain visible after forming or finishing.

Temper Consistency

Consistent H14 condition is important for repeatable springback, forming force and shape retention between production batches.

How to Select the Right Aluminum Circle

1. Confirm the Finished Component

Specify whether the circle will be used for a cookware lid, cover, shallow utensil, stamped part, spun component or another product. Finished geometry determines the required temper and blank size.

2. Confirm the Required Forming Depth

H14 is suitable for many shallow-forming operations, but a deeply drawn component may require a softer temper. Provide the forming depth or finished drawing so the material condition can be reviewed.

3. Specify Diameter and Thickness

This SKU uses a nominal thickness of 0.70 mm. Provide the required circle diameter and dimensional tolerances based on the die, forming allowance and finished component size.

4. Confirm Surface Requirements

State whether the finished part will be polished, anodized, painted, coated or left mill-finish. Surface requirements can influence material handling and inspection criteria.

5. Confirm the Applicable Material Standard

If your purchase specification requires a particular ASTM, EN, GB or customer standard, state it clearly in the inquiry so chemical composition, mechanical properties and tolerances can be reviewed before production.

Discuss Your Aluminum Circle Specification

Information to Provide When Requesting a Quote

For a faster and more accurate quotation, please provide:

Required aluminum alloy
Temper
Thickness
Circle diameter
Thickness and diameter tolerances
Finished product or application
Stamping, shallow drawing or spinning process
Surface requirement
Applicable material standard, if required
Required quantity per diameter
Packing requirements
Destination port or delivery location

For a new stamped or formed component, a drawing or finished-product dimensions can help review blank diameter, temper and forming requirements before bulk production.

Send Your 1100 H14 Aluminum Circle Requirements

Frequently Asked Questions

What is 1100 H14 aluminum circle?

It is a circular blank made from AA1100 aluminum in H14 half-hard temper. The material provides more rigidity than annealed O temper while retaining useful formability for suitable stamping, shallow drawing and spinning operations.

What is 0.70mm 1100-H14 aluminum circle commonly used for?

Typical applications include cookware lids, pot covers, kettle components, shallow-formed kitchenware, stamped parts and other thin-gauge circular components requiring useful shape stability.

Is H14 suitable for deep drawing?

H14 can be used for suitable shallow drawing and forming, but it has lower ductility than fully annealed O temper. Deep cookware bodies or severe drawing operations may require a softer temper depending on the drawing ratio and tooling.

What is the difference between 1100-H14 and 1100-O?

1100-H14 is half-hard and provides greater rigidity and shape retention. 1100-O is fully annealed and softer, providing greater ductility for applications requiring more severe forming.

What diameters can you supply?

The listed aluminum circle production range covers diameters from 20 mm to 1200 mm. Final availability depends on alloy, temper, thickness, diameter and order quantity.

Can you supply other thicknesses?

Yes. This SKU is 0.70 mm, while the broader listed production range covers 0.36–10 mm depending on alloy, temper, diameter and production requirements.

Can the circles be used for spinning?

Yes, 1100-H14 aluminum circles can be suitable for controlled spinning operations. The required deformation, profile depth, tooling and final dimensions should be considered when selecting temper and thickness.

Can you provide custom diameter aluminum circles?

Yes. Custom diameters can be discussed within the available production range. Providing the finished component dimensions or drawing helps determine the appropriate blank diameter.

What surface quality should be checked?

Buyers should check flatness, edge condition, scratches, dents, oxidation marks and surface contamination, especially when the finished component will be polished, anodized or coated.

What information should I provide for a quotation?

Please provide alloy, temper, thickness, diameter, dimensional tolerances, application, forming method, surface requirement, quantity and destination. A drawing is recommended for new formed components.

1100 H14 aluminum circles for cookware and formed parts