Aluminum Laminated foil
Dingang
| Availability: | |
|---|---|
| Quantity: | |
Printable aluminum barrier packaging film is a multilayer flexible laminate developed for packaging converters, printing companies and brand owners requiring high-quality graphics together with strong oxygen, moisture, light and aroma barrier performance.
Typical structures include PET/AL/PE, PET/AL/CPP, PET/AL/PA/PE and customized PET/AL/EVOH/PE laminates. The current product range uses aluminum foil from 6μm to 25μm, total laminate thicknesses from 60μm to 220μm and finished widths from 100mm to 2000mm.
The printable surface can support customized gravure graphics up to 10 colors, with glossy, matte and metallic finishes available. Surface treatment, ink system, artwork registration, laminate construction and sealant should be matched to the final printing, converting and packaging process.
Request Printable Barrier Film Pricing
| Item | Published / Available Specification | Purchasing Consideration |
|---|---|---|
| Product Type | Printable aluminum barrier packaging film | For printing, laminating, pouch conversion and flexible packaging rollstock |
| Typical Structures | PET/AL/PE, PET/AL/CPP, PET/AL/PA/PE, PET/AL/EVOH/PE, customized | Select according to barrier, printing, product compatibility, puncture and sealing requirements |
| Aluminum Foil Thickness | 6μm–25μm | Foil gauge influences pinhole robustness, flex resistance, barrier and cost |
| Total Thickness | 60μm–220μm | Select according to pouch size, fill weight, mechanical exposure and machine process |
| Width | 100mm–2000mm | Custom slitting according to printing, laminating or packaging equipment |
| Roll Length | Customized | Specify core ID, OD, roll weight, winding direction and splice limits |
| Surface Finish | Glossy / Matte / Metallic | Approve physical surface and printed samples before production |
| Printing Method | Gravure printing up to 10 colors | Specify artwork, colors, printing side, repeat and registration requirements |
| Printing Adhesion | Printing-ready treated surface available | Ink adhesion should be qualified with the actual ink, primer, coating and curing system |
| Heat-Seal Layer | PE / CPP / PP | Select according to filling product, sealing temperature and equipment |
| Oxygen Barrier | High-barrier aluminum-containing structure | Specify numerical OTR and test conditions where controlled |
| Moisture Barrier | High-barrier aluminum-containing structure | Specify numerical WVTR and test conditions where controlled |
| Food-Contact Structures | Available where specified | Documentation must match the exact polymer, adhesive, ink, sealant, food and conditions of use |
| Customization | OEM / ODM supported | Structure, graphics, finish, roll format and performance requirements can be customized subject to feasibility |
For packaging converters, printability should be specified together with the surface treatment, printing side, ink system, registration, friction, roll geometry and downstream lamination or pouch-making process.
Get Technical Data & Print Samples
A printable flexible laminate requires more than a visually smooth surface. Ink wetting, anchorage, drying, curing and downstream lamination all depend on the surface condition presented to the printing process.
The order should identify which surface will be printed and whether the graphics will be reverse printed before lamination or surface printed on the finished laminate.
The printable surface should provide sufficient and stable wetting for the selected ink, primer or coating. Where a minimum surface-energy value is required, the test method, treated side and timing of measurement should be stated.
Some printing and lamination systems use primers to improve ink anchorage or adhesive bonding. Primer chemistry should be compatible with the substrate, inks, adhesives and final package requirements.
Oil, dust, silicone, blocking additives or other contamination can interfere with printing and lamination. Clean surface handling is therefore important before conversion.
The current product specification supports gravure printing with up to 10 colors for customized flexible packaging graphics.
Gravure printing can reproduce detailed images, fine text, gradients, product photography and brand elements when cylinder engraving, inks, substrate and press conditions are appropriately controlled.
Multicolor artwork requires accurate alignment between print stations. Buyers should specify acceptable color-to-color registration and print-to-cut tolerance where required.
The artwork repeat should match pouch dimensions, sealing geometry and the packaging-machine registration system.
Automatic packaging rollstock can require printed registration marks for photocell detection. Eye-mark dimensions, position, contrast and pitch should be provided with the artwork specification.
| Printing Construction | Characteristics | Selection Direction |
|---|---|---|
| Reverse Printing | Ink is printed on the inner surface of a transparent outer film and protected after lamination | Useful where graphics require protection from abrasion and direct handling |
| Surface Printing | Ink remains exposed on the outside surface | Requires appropriate ink adhesion, rub resistance and overprint protection where necessary |
Screen and office-printer colors can differ significantly from production gravure printing. Brand-critical projects should approve a physical color reference or production-representative printed sample.
Where color consistency is contractual, the buyer can define an agreed color space, illuminant, observer and permitted color-difference tolerance.
The aluminum barrier layer can influence the appearance of printed colors when the package design intentionally uses transparent or partially opaque inks to create metallic effects.
Printing adhesion depends on the printable surface, primer, ink chemistry, drying or curing conditions and any subsequent laminate or protective coating.
Where print adhesion is critical, an agreed tape, rub or other applicable test should be used instead of relying only on a visual statement that adhesion is excellent.
Surface-printed materials can experience rubbing during winding, pouch conversion, filling, cartoning and distribution. Representative abrasion performance should be specified where graphics remain exposed.
Solvent-based gravure inks and some lamination systems require adequate drying and curing before the material is converted or used for product packaging.
Where odor-sensitive food, nutraceutical, cosmetic or pharmaceutical products are packed, residual-solvent requirements can be specified by analyte, method and maximum permitted value.
Glossy surfaces can provide strong color saturation and high visual contrast for consumer packaging.
Matte surfaces reduce reflected glare and can create a lower-gloss appearance for premium product positioning. Target gloss should be defined where consistency is important.
Metallic visual effects can be developed using the aluminum background together with appropriate artwork and ink opacity. Final appearance should be approved on production-representative material.
| Structure | Primary Characteristics | Typical Selection Direction |
|---|---|---|
| PET / AL / PE | Printable PET outer layer, aluminum barrier and PE sealant | Coffee, dry foods, powders and general high-barrier flexible packaging |
| PET / AL / CPP | Printable PET, aluminum barrier and CPP sealing layer | Confectionery, supplements, cosmetic sachets and compatible CPP-seal applications |
| PET / AL / PA / PE | Additional Nylon layer for puncture, flex and mechanical reinforcement | Vacuum, frozen or mechanically demanding applications after validation |
| PET / AL / EVOH / PE | Customized structure with additional functional gas-barrier layer | Projects requiring a specifically engineered multilayer construction |
The solid aluminum foil layer provides the principal oxygen, moisture, aroma and light barrier in the laminate when the metallic layer remains intact.
Where oxygen transmission affects product stability, the required OTR should be specified numerically together with temperature, relative humidity and test conditions.
For moisture-sensitive products, the required WVTR should be defined numerically rather than described only as an excellent moisture barrier.
An intact aluminum foil layer is opaque and provides strong protection from light transmission through the laminate.
Barrier results measured on flat laminate do not automatically represent the performance of a fabricated pouch. Folds, flex cracks, seals, fitments and mechanical damage can influence finished-package barrier.
Thin aluminum foil can contain pinholes and can develop microcracks under repeated flexing or aggressive folding. These effects become increasingly important when very low OTR or WVTR is required.
Where the finished package experiences severe handling, the buyer can specify post-flex barrier testing or select a reinforced PA-containing structure.
The inner sealant layer should be selected according to the packed product, sealing equipment, filling temperature and required pouch performance.
The seal initiation temperature should be established for the actual sealing layer and test conditions rather than assumed from PE, CPP or PP designation alone.
A practical packaging line requires adequate seal performance across normal changes in jaw temperature, pressure and dwell time.
Hot-tack performance is particularly important where newly formed seals must carry product weight before cooling, such as on some vertical packaging lines.
Seal-strength requirements should define sample width, seal temperature, pressure, dwell time, conditioning and test method.
Printable aluminum laminate contains multiple interfaces that must remain bonded during printing, pouch making, filling, transportation and storage.
Where delamination resistance is critical, peel strength should identify the tested layer pair, specimen width, conditioning and minimum acceptance value.
Laminating adhesive should receive the required curing time before further conversion or product contact according to the adhesive system and manufacturing process.
Printable laminate supplied to converters should be specified as a roll product as carefully as the material structure itself.
Core ID should match the printing, laminating, slitting or packaging-machine unwind system.
Maximum outside diameter should be specified according to machine clearance, web length and handling limits.
The required printing face and sealant face should be identified together with winding orientation to prevent incorrect loading at the converting or packaging line.
Maximum splice quantity, splice type, marker and distance from the roll end can be included in the purchase specification where continuous production is important.
Surface friction influences printing, laminating, pouch-making and form-fill-seal web handling.
Where machine speed is sensitive to slip level, buyers should specify inside and outside COF rather than relying only on the terms glossy or matte.
Stand-up pouches
Flat pouches
Three-side seal bags
Four-side seal sachets
Side-gusset bags
Quad-seal bags
Zipper pouches
Vacuum packaging where the selected laminate is qualified
Stick packs and sachets
VFFS rollstock
HFFS rollstock
Custom converted packaging formats
PET/AL/PE and related printed barrier structures can be used for compatible coffee, tea, spices, dry foods and powdered products requiring protection from oxygen, moisture, aroma loss and light.
Coffee pouch design should consider aroma barrier, residual headspace oxygen, degassing requirements, valve installation and seal integrity in addition to laminate OTR.
Fine powders can contaminate sealing areas. Packaging trials should therefore evaluate seal-through-powder behavior where product dust is likely to enter the seal zone.
Printable aluminum laminates can be converted into compatible confectionery and snack pouches requiring custom graphics and high barrier.
Chocolate, nuts and oil-rich products should be evaluated for compatibility with the sealant, adhesives and other product-contact components.
PA-reinforced aluminum laminates can be evaluated for selected frozen or vacuum packaging applications requiring additional puncture and flex resistance.
Actual suitability depends on low-temperature flexibility, product geometry, sealing requirements, puncture exposure and distribution conditions.
High-barrier printable laminates can be developed for compatible vitamin, probiotic, protein powder and dietary-supplement sachets and pouches.
The barrier requirement should be selected according to the actual formulation, moisture sensitivity, oxygen sensitivity and intended shelf-life conditions.
Food-contact suitability should be assessed for the complete package construction rather than from the presence of aluminum foil alone.
Relevant components include:
PET, PA, PE, CPP, PP or EVOH layers
Aluminum foil
Laminating adhesives
Printing inks
Primers
Overprint coatings
Heat-seal layer
For food-contact use in the European Union, the finished material should meet the applicable general food-contact and Good Manufacturing Practice requirements. Material-specific requirements should also be reviewed for the polymer, coating and other functional layers used.
For U.S. applications, the regulatory basis for the applicable polymers, adhesives, coatings, colorants and other food-contact substances should correspond to their intended food and conditions of use.
Printable aluminum barrier laminates can be developed for selected healthcare and pharmaceutical packaging, but a general commercial laminate should not automatically be treated as qualified primary drug packaging.
The required container-closure system should be qualified for the specific drug product, dosage form, contact conditions and applicable regulatory requirements.
Where a laminate is intended for a pharmaceutical powder or unit-dose sachet, barrier performance, seal integrity, compatibility and migration requirements should be defined for the actual formulation.
Medical-device packaging may require sterilization compatibility, microbial-barrier performance and validated seal integrity that should be specified separately from ordinary commercial packaging requirements.
Printable barrier film can be used for compatible facial-mask sachets, shampoo samples, creams, gels, lotion packs and refill pouches requiring premium graphics and light or oxygen protection.
Fragrance oils, alcohol, surfactants and active ingredients can influence sealants and adhesives, so the final laminate should be tested with the actual formulation.
Customized printable aluminum laminates can be evaluated for compatible household and consumer products requiring printed presentation and environmental barrier protection.
Cleaning liquids, solvent-containing products and aggressive formulations require product-contact compatibility testing with the actual sealant and laminate adhesive system.
Printable aluminum laminate can provide branding, handling instructions and barrier protection for compatible industrial components and moisture-sensitive products.
Where electronics require ESD, static-dissipative or specialized moisture-barrier packaging, these electrical properties should be specified separately. Standard printable aluminum laminate should not automatically be treated as ESD-qualified packaging.
The general printable aluminum laminate described on this page should not automatically be treated as suitable for retort, pasteurization, sterilization or hot-fill processes.
High-temperature applications require appropriate adhesives, inks and sealants together with qualification for the actual process temperature, pressure and dwell time.
A high-barrier laminate can support the target shelf life of a packaged product, but the material alone does not establish commercial shelf life.
Product sensitivity, OTR, WVTR, seal integrity, residual oxygen, filling conditions, storage temperature, humidity and distribution all influence final package performance.
| Inspection Item | What to Confirm |
|---|---|
| Laminate Structure | Exact layer construction and material identification |
| Aluminum Thickness | Required 6–25μm foil gauge and tolerance |
| Total Thickness | Required 60–220μm laminate gauge and tolerance |
| Width | Finished width and slitting tolerance |
| Printable Surface | Printing side, surface treatment and cleanliness requirements |
| Ink Adhesion | Test with the intended ink / primer system where required |
| Print Registration | Color-to-color and print-to-cut tolerance |
| Color Difference | Approved physical reference and agreed measurement criteria |
| Rub Resistance | Applicable abrasion requirement for surface-printed graphics |
| Residual Solvent | Specified analytes and limits where applicable |
| Lamination Peel Strength | Layer pair, conditioning and minimum required value |
| OTR | Numerical target and test environment |
| WVTR | Numerical target and test environment |
| Seal Strength | Sealant, sealing conditions and test method |
| COF | Inside / outside friction where converter or packer requires controlled slip |
| Roll Quality | Core, OD, winding, telescoping, edge alignment and splice limits |
Printable aluminum barrier film can be supplied in roll form with moisture-resistant export packaging according to roll size, weight and downstream converting requirements.
Eye-to-sky or eye-to-wall packaging can be arranged according to handling and converting equipment.
The current published lead-time reference is 10–20 days depending on structure, printing, quantity and production schedule. Final delivery timing should be confirmed during quotation.
Wooden Case Packing
Pallet Coil Packing
Aluminum Foil Barrier Pouch
For an accurate printable aluminum barrier film quotation, please provide as much of the following information as possible:
Final packed product
Packaging converter or finished packaging application
Required PET/AL/PE, PET/AL/CPP, PET/AL/PA/PE or custom structure
Required aluminum foil thickness
Required total thickness
Finished width and tolerance
Printing side
Reverse or surface printing
Required surface treatment
Ink and primer system, if already specified
Number of gravure colors
Artwork files
Approved color references
Print registration tolerance
Print repeat
Eye-mark size and position
Glossy, matte or metallic finish
Ink-adhesion requirement
Rub-resistance requirement
Residual-solvent limits
Required OTR
Required WVTR
PE, CPP or PP sealant requirement
Seal initiation temperature
Required seal window
Hot-tack requirement
Required seal strength
Required lamination peel strength
Inside and outside COF
Puncture or tear requirements
VFFS, HFFS, pouch-making or other converting process
Machine manufacturer and model
Production-line speed
Core inner diameter
Maximum roll outside diameter
Maximum roll weight
Winding direction
Maximum permitted splices
Food-contact or other product-contact documentation
Retort, hot-fill, sterilization or special process requirements
Order quantity
Destination country or delivery port
Send Your Printable Film Specifications
It is a multilayer aluminum foil laminate designed to support custom printing while providing oxygen, moisture, aroma and light barrier for compatible flexible packaging applications.
Printable film emphasizes the substrate, surface treatment and converter compatibility required for printing and downstream conversion. Printed packaging film refers to material that has already received the required graphics and printing construction.
The current product range includes PET/AL/PE, PET/AL/CPP, PET/AL/PA/PE, PET/AL/EVOH/PE and customized multilayer structures.
The current published aluminum foil range is 6μm to 25μm.
The current published total laminate thickness is 60μm to 220μm.
The current width range is 100mm to 2000mm, subject to laminate construction and converting requirements.
The current product specification supports gravure printing up to 10 colors.
Suitable constructions can be configured for reverse printing where the graphics are printed on the inner face of the outer transparent film before lamination. The required printing side should be identified when ordering.
Yes, where the selected printing construction is suitable. Ink adhesion, abrasion resistance and any required protective varnish should be validated for exposed graphics.
Specify the printing side, surface-treatment requirement, intended ink and primer system, printing process, adhesion requirement and downstream lamination conditions.
No. Adhesion depends on surface condition, ink chemistry, primer, drying or curing and the final coating or lamination construction.
Custom brand-color matching can be discussed according to physical color references and production capability. Printed sample approval is recommended before bulk production.
Metallic effects can be developed using suitable ink opacity and the appearance of the aluminum-containing laminate. Final appearance should be approved from physical samples.
Registration controls alignment between multiple colors and between printed graphics, cutting and sealing positions. Poor registration can affect appearance and pouch conversion.
Automatic packaging machines use registration marks to control cutting and sealing positions. Their dimensions, color, contrast and location should match the machine's sensor system.
Yes, where solvent-based inks or adhesives are used and odor, food contact or product compatibility is important. Required limits should be specified numerically.
An intact aluminum foil layer provides extremely strong oxygen barrier, but pinholes, flex cracks, folds, seals and pouch damage can affect finished-package performance.
Yes. Numerical OTR and WVTR targets with defined test conditions are more useful for procurement than general descriptions such as excellent barrier.
Suitable rollstock can be configured for VFFS and HFFS equipment. COF, sealing window, hot tack, roll geometry and registration should match the specific machine.
Suitable food-contact structures can be developed, but all relevant polymers, adhesives, inks, coatings and sealants must be appropriate for the intended food and conditions of use.
Selected structures can be evaluated for pharmaceutical use, but general printable aluminum laminate should not automatically be treated as qualified primary drug packaging.
Medical-device packaging can require specific sterilization, microbial-barrier and seal-integrity validation beyond ordinary flexible-packaging requirements.
Not automatically. Retort packaging requires suitable retort-grade adhesives, inks and sealants together with validation at the required processing temperature, time and pressure.
It can be evaluated for compatible vacuum packaging because the PA layer can improve mechanical durability, but seal integrity, puncture resistance and product geometry should be validated.
Yes. Width, roll length, core size, OD, roll weight, winding direction and splice requirements can be customized subject to production capability.
Sample availability can be confirmed according to laminate structure, gauge, surface treatment and finish. Converter printing and machine trials are recommended before commercial approval.
Please provide laminate structure, foil gauge, total thickness, width, printing side, surface-treatment requirement, artwork, printing colors, registration, finish, OTR/WVTR, sealing requirements, COF, roll configuration, application, quantity and destination.
Products
Application
Quick links
Contact Us