Aluminum Alloy 8011
Dingang
| Aluminum Alloy: | |
|---|---|
| Aluminum Foil Thickness: | |
| Color Options::: | |
| ID: | |
| Temper: | |
| Availability: | |
| Quantity: | |
High-barrier laminated aluminum foil combines a solid aluminum barrier layer with functional polymer films, adhesives and heat-seal layers for premium foods requiring strong protection from oxygen, moisture, light, aroma loss and external contamination.
Typical structures can include PET/AL/PE, PET/AL/CPP, PET/PA/AL/PE and qualified retort laminates. Each layer performs a different function: the outer film supports printing and mechanical protection, aluminum provides the primary light and gas barrier, and PE, CPP or another suitable sealant creates the package seal and food-contact surface.
AA8011-O and AA8079-O aluminum foil can be selected according to foil gauge, flex requirements and converting conditions. The final structure should be engineered around the packaged food, filling process, target shelf life, storage conditions, package geometry and packaging-machine requirements.
Aluminum foil can provide an extremely strong barrier when intact, but finished-package performance also depends on pinholes, flex cracking, laminate bond strength, puncture resistance, seals, valves, closures and processing conditions. Shelf life should therefore be validated on the complete package rather than predicted from aluminum foil alone.
Request High-Barrier Laminate Samples and Pricing
Premium food packaging often has to provide several functions simultaneously: barrier protection, puncture resistance, printability, heat sealing, machine runnability and resistance to distribution stresses.
A multilayer aluminum foil laminate addresses these requirements by assigning each function to the most suitable material layer instead of expecting one film to provide every property.
Continuous solid aluminum foil is opaque and provides an extremely strong barrier to oxygen, water vapor, light and aroma transmission through the metallic layer.
PET, PA, BOPP or another suitable outer film can provide print support, stiffness, abrasion resistance, dimensional stability or additional mechanical protection.
PE, LLDPE, CPP, RCPP or another application-specific sealant creates the package closure and usually forms the direct food-contact surface.
The laminating adhesive must maintain adequate interlayer bond strength through converting, filling, storage and any required thermal process. Adhesive chemistry and curing conditions should be selected according to the exact laminate and food application.
Structure | Main Characteristics | Typical Application Direction |
|---|---|---|
PET / AL / PE | Printability + high barrier + PE sealing | Coffee, tea, powders, spices, dried foods and general ambient high-barrier packs |
PET / AL / CPP | High barrier with CPP sealant | Applications requiring compatible PP-based sealing performance |
PET / PA / AL / PE | Higher puncture and flex resistance | Vacuum packs, heavier products and mechanically demanding pouches |
PET / AL / PA / RCPP | High barrier + reinforcement + retort sealant | One possible direction for qualified retort packaging |
PET / AL / RCPP | Simplified retort-oriented structure | Suitable only when every layer is validated for the specified sterilization cycle |
Paper / PET / AL / PE | Paper appearance with foil barrier | Premium dry foods, ingredients and specialty retail packaging |
These structures are engineering directions rather than universal recipes. Film thickness, foil gauge, adhesive, sealant and total laminate thickness should be finalized from the packaged product and processing conditions.
Technical Property | Available / Typical Direction | Purchasing Guidance |
|---|---|---|
Primary Foil Alloys | AA8011 / AA8079 | Common flexible-packaging foil alloys |
Temper | O Temper | Soft condition suitable for flexible lamination and converting |
Typical Foil Gauge Direction | Approximately 6–20μm or Project-Specific | Select according to barrier, pinhole, flex and conversion requirements |
Outer Film | PET / PA / BOPP / Paper / Custom | Provides printing and mechanical functions according to structure |
Sealant Layer | PE / LLDPE / CPP / RCPP / Custom | Must match food type, fill process and thermal treatment |
Lamination Process | Solventless / Solvent-Based / Application-Specific | Select according to adhesive system, structure, cure and processing requirements |
OTR | Finished-Laminate Requirement | State test method and environmental conditions with numerical target |
WVTR | Finished-Laminate Requirement | A value such as <0.05 g/m²·24h should only be used when verified under stated conditions |
Light Barrier | Opaque with Continuous Foil | Useful for light-sensitive foods and ingredients |
Seal Strength | Project-Specific | Define seal temperature, pressure, dwell time and test method |
Hot Tack | Application-Specific | Important for high-speed filling where seals carry load before cooling |
Lamination Bond Strength | Project-Specific | Evaluate after required adhesive curing and conditioning |
Puncture Resistance | Structure-Dependent | PA reinforcement can be added where product geometry is demanding |
Flex-Crack Resistance | Structure-Dependent | Important for gussets, vacuum packaging and repeatedly flexed pouches |
Printing | Rotogravure / Flexographic / Surface or Reverse Printing | Artwork and ink system should match the laminate and market requirements |
Machine Compatibility | VFFS / HFFS / Pouch Making / Vacuum Packing | Confirm width, core, reel OD, friction, stiffness, print repeat and sealing window |
Food-Contact Documentation | Structure-, Food- and Market-Specific | Review all films, adhesives, inks and food-contact sealants |
Oxygen exposure can contribute to rancidity, aroma loss, pigment changes and deterioration of oxygen-sensitive ingredients. Intact aluminum foil provides an extremely low oxygen-transmission pathway.
Numerical OTR requirements should still be specified and tested on the finished laminate because pinholes, flex cracks and conversion damage can change the effective barrier.
Low moisture transmission is particularly important for milk powder, beverage powders, spices, nutritional powders, dried foods and hygroscopic ingredients.
WVTR values must include the test temperature and relative-humidity conditions because results measured under different environments are not directly comparable.
Continuous aluminum foil is opaque and can protect light-sensitive oils, flavors, pigments and nutrients from direct light exposure.
Aluminum-containing laminates can strongly reduce loss of volatile aromas, but final aroma retention also depends on package seals, closures, valves, product formulation and storage conditions.
A foil laminate can have excellent measured OTR and WVTR but still fail in commercial use if the package seal contains channels, contamination or weak areas.
ASTM F88/F88M can be specified where appropriate to quantify the force required to separate flexible-package seals.
Hot tack becomes important on high-speed packaging equipment where newly formed seals are loaded by product weight before the seal has fully cooled.
Powders, spices, coffee particles, sauces and protein residues can contaminate the sealing area. Where this occurs in production, representative contaminated-seal trials should be included in material qualification.
The production sealing window should cover a practical range of temperature, pressure and dwell time instead of relying on a single ideal laboratory setting.
Solventless lamination can be used to bond polymer films and aluminum foil without an intentional solvent carrier. This can reduce drying energy and eliminate the solvent-removal stage associated with conventional solvent-based adhesive lamination.
Solventless lamination should not automatically be described as migration-free, odor-free or immediately ready for food packing.
The adhesive must be suitable for the films, aluminum surface, packaged food and any required thermal treatment.
Reactive adhesive systems require sufficient cure time before demanding conversion, filling or thermal processing. Bond strength and any applicable residual-reactive requirements should be evaluated after cure.
Premium foods can reveal packaging odors or flavor taint more readily than strongly flavored products. Adhesive, ink and coating systems should therefore be selected and processed to maintain acceptable sensory neutrality.
Solid aluminum foil provides excellent initial barrier performance but has limited stretch compared with polymer films.
Repeated folding, gusset formation, vacuum draw-down, sharp product edges and rough distribution can create flex cracks or punctures that reduce the barrier of the finished package.
Adding PA can improve puncture resistance, toughness and flex durability for packages containing meat, fish, hard particles or heavier products.
Vacuum packaging pulls the laminate tightly against the product. Sharp bones, frozen edges or irregular food shapes can therefore require stronger mechanical layers than conventional dry-food pouches.
For demanding applications, barrier testing after representative flexing can provide more useful information than initial unflexed OTR or WVTR alone.
Process | Packaging Requirement | Material Guidance |
|---|---|---|
Ambient Filling | Barrier, sealing and product compatibility | PET/AL/PE or PET/AL/CPP can be suitable directions after validation |
Hot Fill | Heat-resistant films, adhesive and sealant | Structure must be qualified for the actual filling temperature and hold time |
Pasteurization | Water and thermal resistance plus stable seals | Validate the complete package through the exact process cycle |
Retort Sterilization | Retort-grade films, adhesive, ink and sealant | Use a dedicated qualified retort laminate such as PET/AL/PA/RCPP where appropriate |
A standard PET/AL/PE laminate should not automatically be described as retortable. Retort performance is a property of the complete qualified package construction.
Shelf-stable ready meals, sauces, proteins and selected wet foods can require sterilization at elevated temperature and pressure.
RCPP or another validated retort sealant should retain sufficient seal strength after the specified thermal process.
Laminating adhesive must maintain bond strength after the target sterilization temperature, dwell time and cooling cycle.
Printing systems used in retort laminates must tolerate the required heat, moisture and pressure without unacceptable discoloration, transfer or loss of adhesion.
Finished packs should be checked after the process for delamination, seal integrity, flex cracking, barrier retention and visible package distortion.
Coffee and tea can be highly sensitive to oxygen, moisture, light, aroma loss and external odors. Solid-foil laminates are suitable where very high barrier and complete opacity are required.
Freshly roasted coffee may also require controlled degassing. A one-way valve can be incorporated where the product continues releasing significant carbon dioxide after packing.
Milk powder, cocoa, beverage mixes, nutritional powders, seasonings and other hygroscopic products can absorb moisture and become caked, clumped or chemically unstable.
For fine powders, package validation should also consider contamination of the heat-seal area because powder particles can reduce seal integrity.
Processed meat, seafood and protein products can impose different demands from dry foods because the package may encounter oils, salts, acids, vacuum forces, sharp product edges and refrigerated or thermal processing conditions.
A standard dry-food PET/AL/PE laminate should therefore not automatically be used for every protein product. Sealant chemistry, adhesive compatibility, mechanical reinforcement and thermal process should be selected around the actual food formulation.
PA-containing foil laminates can improve resistance to puncture and repeated flexing where the vacuum process pulls the packaging tightly against the food.
Oils and fats can interact with certain adhesives and sealants over long storage periods. Compatibility should be tested with the real formulation.
High-barrier laminate can protect nutritional powders, supplements and botanical ingredients from environmental exposure where the package structure is compatible with the product.
Packaging barrier performance does not establish the stability or efficacy of the nutritional ingredients themselves. Product-specific shelf-life and stability programs remain necessary.
Premium flexible packaging can use rotogravure or flexographic printing for brand graphics, product information, barcodes, QR codes and market-specific labeling.
Where transparent PET is used as the outer web, printing can be placed on the reverse side of the film before lamination so that the ink is protected inside the laminate.
Final ink adhesion depends on film or foil surface preparation, ink chemistry, curing and printing conditions. Surface-energy measurements alone do not establish final adhesion.
Brand-critical colors should be approved against a printed master or production proof with an agreed instrumental method and color tolerance where required.
Food-contact suitability should be evaluated for the complete laminate structure, including films, aluminum foil, adhesives, inks, coatings and sealants, together with the intended food and conditions of use.
Food-contact materials supplied for European markets should be evaluated against Regulation (EC) No 1935/2004 and applicable good manufacturing practice requirements under Regulation (EC) No 2023/2006.
Printing on the non-food-contact side should be controlled so that substances do not transfer through the material or by set-off to the food-contact side at unacceptable levels.
Regulation (EU) No 10/2011 applies to relevant plastic food-contact layers within its scope and should not be presented as blanket certification for an entire aluminum-containing multilayer laminate.
U.S. food-contact suitability depends on the individual food-contact substances and their authorized conditions of use. Food type, temperature and thermal treatment should therefore be identified before the structure is finalized.
SFDA, SASO and other destination-market documentation can be reviewed according to the exact laminate, product, food-contact layer and intended conditions of use.
Aluminum foil laminates provide very high barrier performance with relatively thin material layers, which can reduce food loss and enable lightweight flexible packaging.
However, conventional PET/AL/PE and similar multi-material laminates are not generally compatible with standard mono-material flexible-plastic recycling streams because the polymer and aluminum layers are bonded together.
Where recyclability is a primary requirement, brands should compare foil laminates with qualified mono-material or foil-free high-barrier alternatives while verifying that the alternative still provides the required product protection and shelf life.
Stable runnability depends on the complete laminate structure rather than the aluminum foil alone.
Roll width, slit tolerance and edge quality should match the packaging-machine and package-format requirements.
Core diameter, reel outside diameter and maximum reel weight should match the unwinder and plant material-handling system.
Surface friction influences tracking, forming and feeding and can be specified where high-speed equipment is sensitive to slip behavior.
Printed rollstock should match the required package repeat, photocell mark, cutting position and unwind direction.
Inspection Item | Why It Matters | Control Direction |
|---|---|---|
Alloy and Temper | Confirms foil substrate | Verify AA8011-O, AA8079-O or ordered specification |
Foil Gauge | Influences barrier, pinholes and converting | Measure aluminum separately from total laminate thickness |
Total Thickness | Influences stiffness and machine performance | Agree finished-laminate tolerance |
Pinhole Control | Supports foil barrier integrity | Define count or defect limit where critical |
Surface Energy | Supports adhesive or ink wetting | Use as a wetting indicator, not as proof of bond strength |
Adhesive Coat Weight | Influences bond and cure | Control according to laminate and adhesive system |
Lamination Bond Strength | Reduces ply separation | Test after complete adhesive cure |
OTR | Quantifies oxygen barrier | Test exact finished structure under agreed conditions |
WVTR | Quantifies moisture barrier | State temperature, RH and method |
Seal Strength | Controls package closure | ASTM F88/F88M or agreed method |
Hot Tack | Important for high-speed packaging | Evaluate at representative line conditions |
Puncture Resistance | Important for sharp or heavy products | Evaluate finished laminate where required |
Flex Resistance | Screens foil cracking during use | Measure barrier after representative flexing where critical |
Ink Adhesion | Supports print durability | Evaluate after printing and curing |
Residual Solvent / Odor | Important to food sensory quality | Define where applicable to ink or adhesive process |
Roll Winding | Supports smooth machine unwinding | Inspect telescoping, wrinkles, loose winding and edge damage |
Post-Retort Testing | Required for thermal-sterilization structures | Check bond, seals, barrier and appearance after actual cycle |
For accurate structure selection and pricing, please provide:
Packaged food product
Dry, oily, acidic, salty or high-moisture formulation
Target shelf life
Ambient, chilled, frozen, hot-fill, pasteurized or retort process
Required laminate structure if already specified
Aluminum foil alloy and gauge
Outer-film type and thickness
PA / Nylon reinforcement if required
Sealant layer
Total laminate thickness
Required OTR and test conditions
Required WVTR and test conditions
Required seal strength
Hot-tack requirement
Puncture or flex requirement
Vacuum-pack requirement if applicable
Retort temperature, time and pressure where applicable
Solventless or other lamination preference
Printing artwork and number of colors
Surface or reverse printing
Package-machine type
Roll width
Core ID, reel OD and maximum roll weight
Print repeat and unwind direction
Food-contact documentation requirements
Destination market
Order quantity
Get a Custom High-Barrier Laminate Proposal
It is a multilayer flexible packaging material combining solid aluminum foil with polymer films, adhesive and a sealant layer to provide barrier, mechanical, printing and sealing functions.
AA8011-O and AA8079-O are current alloy directions for flexible high-barrier lamination. Final selection depends on foil gauge and converting requirements.
It is a three-layer direction in which PET provides printing and outer protection, aluminum provides the principal barrier, and PE provides the food-contact and heat-seal layer.
PA can be added where greater puncture resistance, flex toughness or vacuum-pack durability is required.
Intact continuous aluminum foil provides an extremely strong barrier through the metallic layer, but the finished package can still be affected by pinholes, flex cracks, seals and conversion damage.
It should only be treated as a guaranteed value when the exact finished laminate has been tested under specified temperature and humidity conditions and meets the agreed limit.
State the numerical target together with the test method, temperature, relative humidity and exact laminate structure.
No. Solventless describes the adhesive process. Food-contact suitability still depends on the actual adhesive, cure, films, sealant, inks, food type and conditions of use.
No. Reactive adhesive chemistry and cure conditions must still be controlled and evaluated for the intended food-contact application.
It should not automatically be used for retort. Retort packaging requires films, adhesive, ink and sealant specifically qualified for the actual sterilization cycle.
PET/AL/PA/RCPP or another qualified retort structure can be considered, but all layers must be validated through the actual thermal process.
Yes, with a structure designed for the specific product. PA reinforcement, puncture resistance, sealant compatibility and actual food composition should be considered.
Yes. High moisture and oxygen barrier can be useful for hygroscopic powders, provided seal integrity and the complete laminate are suitable for the product.
No. Shelf life also depends on product formulation, residual oxygen, water activity, filling process, seals, storage temperature and distribution conditions.
ASTM F88/F88M is one recognized method for measuring seal strength in flexible barrier packaging where appropriate.
Hot tack describes seal strength before the seal has fully cooled and can be important on high-speed lines where the product immediately loads the new seal.
Yes, when total thickness, stiffness, friction, roll dimensions, print repeat and sealing characteristics are compatible with the machine.
No blanket claim should be made. U.S. food-contact suitability depends on the individual components and their authorized conditions of use with the intended food.
No. It applies to relevant plastic food-contact materials within its scope. The aluminum, adhesive, printing and other parts of the complete package must meet their applicable requirements.
Conventional PET/AL/PE and similar bonded multi-material structures are generally difficult to recycle in standard flexible-plastic recycling streams. Local collection and recycling infrastructure should be checked for the destination market.
Foil-free or mono-material structures can be considered where recycling design is a major priority and the alternative structure can still meet the required barrier, seal, shelf-life and processing performance.
Please provide the food product, target shelf life, filling and thermal process, preferred laminate, foil gauge, barrier targets, seal requirements, printing, machine type, roll dimensions, compliance needs, quantity and destination.
Yes. New structures should be evaluated with the actual food, filling process, packaging machine, sealing conditions, storage environment and any required thermal process before commercial production.
Products
Application
Quick links
Contact Us