Aluminum Alloy 8011
Dingang
| Aluminum Alloy: | |
|---|---|
| Aluminum Foil Thickness: | |
| Color Options::: | |
| ID: | |
| Temper: | |
| Availability: | |
| Quantity: | |
Aroma-sealing printed aluminum foil is designed for coffee, tea, spices, herbs, flavor ingredients, bakery ingredients and other sensitive foods whose commercial value depends strongly on retaining volatile aromas, essential oils, flavor compounds and freshness during storage and distribution.
AA8011-O aluminum foil can be used as the high-barrier metallic layer in printed flexible laminates such as PET/AL/PE, PET/AL/CPP and other application-specific structures. The foil provides strong protection against light, oxygen and moisture when it remains intact, while the polymer layers provide printing, mechanical protection and heat sealing.
Aroma retention is a property of the complete package rather than the aluminum layer alone. Final performance also depends on laminate bond quality, heat seals, residual oxygen, valves or closures, flex cracking, product oils, storage temperature and the permeability of the complete package construction.
For freshly roasted coffee, high barrier must also be balanced with controlled carbon-dioxide release. A one-way degassing valve can be specified when the coffee continues to release sufficient CO₂ after packing, while tea, spices and other non-degassing products normally require a different package configuration.
Request Samples and a Quotation
Parameter | Available / Current Direction | Purchasing Guidance |
|---|---|---|
Product | Printed Aluminum Foil / Foil Laminate for Aroma-Sensitive Foods | For coffee, tea, spices, herbs and aroma-sensitive dry foods |
Primary Foil Alloy | AA8011 | Common flexible-packaging foil alloy |
Temper | O Temper | Soft annealed condition for lamination and flexible converting |
Foil Thickness | Application-Specific | Select according to barrier, pinhole, flex and package requirements |
Current Gauge Tolerance Target | ±3% Where Contractually Specified | Confirm against the ordered foil gauge and applicable standard |
Typical High-Barrier Structure | PET / AL / PE | Suitable direction for coffee, tea, spices and aroma-sensitive dry products |
Alternative Structure | PET / AL / CPP | For applications requiring a PP-based sealant layer |
Reinforced Structure | PET / PA / AL / PE | Can improve puncture resistance for sharp herbs, spices or demanding pouch formats |
Paper-Look Structure | Paper / PET / AL / PE or Application-Specific | For premium natural appearance where barrier and seal requirements are maintained |
Outer Print Web | PET / BOPP / Paper / Custom | Provides printing support and external mechanical protection |
Heat-Seal Layer | PE / LLDPE / CPP / Application-Specific Sealant | Select according to product oils, filling process and machine conditions |
Printing | Rotogravure / Flexographic / Multi-Color | Surface or reverse print depending on structure |
Surface Energy | Current Target: 38+ dynes/cm Where Specified | Wetting indicator only; does not prove bond or seal strength |
OTR | Finished-Laminate Specification | A target such as <0.01 cm³/m²·24h should be tied to the exact laminate and test conditions |
WVTR | Finished-Laminate Specification | State test temperature, relative humidity and method |
Seal Strength | Finished-Package Requirement | ASTM F88/F88M can be specified where appropriate |
Hot Tack | Application-Specific | Important on high-speed VFFS lines where seals carry load before cooling |
Lamination Bond | Structure-Specific | Evaluate after full adhesive cure and conditioning |
Degassing Valve | Optional for Freshly Roasted Coffee | Select according to coffee degassing profile, roast-to-pack time and package format |
Nitrogen Flushing | Optional | Can reduce residual oxygen where the filling process and product require it |
Machine Compatibility | VFFS / HFFS / Vacuum Pack / Sachet / Pouch | Confirm width, core, OD, friction, repeat, valve position and seal window |
Food-Contact Documentation | Destination- and Structure-Specific | Review films, adhesive, inks, coatings and food-contact sealant together |
Send Your Aroma-Sensitive Food Packaging Specification
Aroma-sensitive foods contain volatile compounds that can gradually migrate from the product into the package headspace and through lower-barrier packaging structures.
High-barrier foil laminates reduce this loss by combining an intact aluminum layer with reliable laminate bonds and heat seals.
Continuous aluminum foil provides an extremely strong barrier to oxygen, moisture, light and volatile aroma transmission through the foil itself.
PET or another suitable outer film supports printing, abrasion resistance and dimensional stability while protecting the aluminum barrier during handling.
PE, LLDPE, CPP or another compatible sealant closes the package. Aroma can escape through poor seals even when the aluminum layer itself has excellent barrier performance.
Adhesive must maintain interlayer bond strength while avoiding unacceptable odor or flavor taint. Cure conditions and compatibility with essential oils or flavor compounds should be considered for sensitive products.
Oxygen Transmission Rate measures oxygen passing through the tested flexible material. A very low OTR can help reduce oxidative degradation of coffee oils, spice oils and other oxygen-sensitive flavor compounds.
A numerical target such as <0.01 cm³/m²·24h should only be used where it has been verified for the exact finished laminate under stated test conditions.
OTR does not measure aroma transmission directly. A package with very low OTR can still lose aroma through seals, valves, closures, flex cracks or other defects.
ASTM D3985 can be specified for oxygen-transmission testing of suitable flexible films and laminates where an instrumental OTR value is required.
Tea leaves, dried herbs, spices and powdered ingredients can absorb atmospheric moisture, leading to caking, loss of crispness, changes in aroma release and other quality changes.
High-barrier foil laminates can strongly reduce moisture ingress when the foil and seals remain intact.
ASTM F1249 can be specified for suitable flexible structures where a quantitative water-vapor transmission rate is required.
WVTR results should always identify temperature and relative-humidity conditions because results obtained under different environments are not directly comparable.
Freshly roasted coffee differs from most tea, spice and dry-food products because it continues releasing carbon dioxide after roasting.
If coffee is packed while significant degassing continues, a completely sealed high-barrier pouch can expand. A one-way valve provides a controlled route for CO₂ to leave while minimizing reverse ingress of outside air.
Whole-bean coffee packed soon after roasting commonly benefits from a one-way degassing valve where the product's gas-release profile requires it.
Ground coffee has greater exposed surface area and can be particularly sensitive to oxygen and aroma loss. Vacuum packaging, nitrogen flushing, high-barrier webs and degassing systems can be evaluated according to the packing process.
Instant coffee normally places greater emphasis on moisture barrier and seal integrity than on post-roast degassing. Sachet and stick-pack structures should therefore be selected according to hygroscopicity and filling-machine requirements.
Not every coffee package requires the same valve. Selection should consider roast level, roast-to-pack time, whole bean or ground product, fill weight, package headspace, storage period and distribution conditions.
The opening pressure should allow CO₂ release without unnecessary ingress of outside atmosphere. The exact specification should come from the valve supplier and coffee-pack validation.
Valve attachment must remain sealed to the flexible web. Poor valve welding or bonding can create an oxygen or aroma leakage path independent of the laminate barrier.
Fine ground-coffee particles can contaminate sealing or valve areas. Package design and filling trials should account for the actual product particle size and line conditions.
Very high barrier cannot remove oxygen that is already trapped inside the package at the time of sealing.
Residual oxygen can come from package headspace, air trapped between particles and oxygen introduced during filling.
Nitrogen flushing can reduce residual oxygen where this is appropriate for the product and filling process.
Vacuum packaging can also reduce headspace oxygen for suitable products such as ground coffee, but the finished laminate and package geometry must withstand the vacuum process.
Shelf life should be validated using the actual product, fill process, residual oxygen, packaging structure, storage temperature and distribution conditions rather than predicted from foil barrier alone.
Specialty tea contains delicate volatile compounds that can be affected by oxygen, moisture, heat, light and external odors.
High-barrier aluminum laminates can be used for loose-leaf tea, premium tea sachet overwraps and bulk tea packs where strong aroma and moisture protection are required.
Delicate floral and fresh aromatic profiles can benefit from low oxygen ingress and protection from external odors.
Packaging should be selected according to the product's intended aging or storage profile because not every tea requires the same degree of hermetic barrier.
Spices and herbs can contain volatile essential oils responsible for aroma, flavor intensity and perceived freshness.
In addition to oxygen and moisture barrier, packaging materials should be evaluated for compatibility with the actual oil and flavor compounds in the product.
High concentrations of essential oils can interact with certain sealants, adhesives or coatings. New spice and botanical formulations should therefore be tested with the complete laminate.
Whole spices, dried stems and coarse herbal products can impose greater puncture and flex loads than powders. A reinforced PA layer or increased total laminate thickness can be considered where required.
Fine spice powders can enter the heat-seal area and create channels or reduce seal strength. Production validation should include realistic seal contamination when this is a known line condition.
A high-barrier foil structure can still lose aroma through a poorly formed package seal.
ASTM F88/F88M can be used where appropriate to quantify flexible-package seal strength under controlled test conditions.
High-speed VFFS packaging can place load on a seal before it has fully cooled. Appropriate hot-tack properties help maintain seal integrity during immediate downstream handling.
Coffee powder, spice dust and fine food particles can interfere with heat sealing. Sealant selection and filling-line setup should account for likely contamination conditions.
A surface-energy target such as 38+ dynes/cm can indicate whether ink, primer or adhesive can adequately wet the aluminum surface.
It does not prove ink adhesion, laminate bond strength, seal integrity or aroma retention by itself.
Bond strength depends on surface cleanliness, adhesive chemistry, coating weight, mixing, cure and compatibility with the packaged product.
ASTM F904 can be specified where appropriate for separating laminate plies and evaluating interlayer bond strength.
Aroma-sensitive products can reveal packaging odors that would be less noticeable in strongly flavored foods.
Ink systems, laminating adhesives, coatings and residual processing substances should therefore be selected and fully cured to minimize the risk of unwanted odor or flavor transfer.
Where solvent-based printing or lamination is used, residual solvent requirements can be specified for sensitive food applications.
Solvent-free lamination avoids an intentional solvent carrier and can reduce drying requirements, but it does not automatically mean the finished laminate is odor-free or migration-free. Correct adhesive selection and full curing remain necessary.
Premium coffee, tea and spice projects can include application-specific sensory or odor evaluation where organoleptic neutrality is commercially important.
Where transparent PET is used as the outer layer, artwork can be reverse printed before lamination so that the ink is protected between the outer film and the internal laminate structure.
Reverse printing helps protect graphics from rubbing during transport and retail handling.
Conventional printing should remain away from direct food contact unless the exact ink system has been specifically evaluated for that intended use.
Brand-critical projects should approve production proofs or master samples and define print registration, repeat length and color tolerance where required.
Thin aluminum foil provides extremely high initial barrier performance but has limited stretch compared with flexible polymer films.
Severe folding, gusseting or repeated flexing can create microcracks in the foil and reduce the barrier of the completed laminate.
Coffee bags with side gussets, flat bottoms or complex folds should be evaluated after representative forming and flexing when barrier retention is critical.
PA nylon can improve the mechanical toughness of demanding structures, although the finished package should still be evaluated for foil cracking and barrier retention.
Smooth machine operation depends on the complete printed laminate rather than AA8011-O alone.
Finished web width and slitting tolerance should match the VFFS, HFFS, vacuum-packing or sachet machine.
Core ID, maximum reel diameter and roll weight should match the customer's unwinder and changeover requirements.
Surface friction influences web feeding and forming and can be specified where packaging equipment is sensitive to slip characteristics.
Artwork repeat, photocell mark and cutting position should be matched to the package dimensions and machine registration system.
Production trials should establish a practical sealing window covering temperature, pressure and dwell time across the required machine speed.
Product | Primary Packaging Challenge | Material Direction |
|---|---|---|
Whole-Bean Coffee | Oxygen, aroma, moisture, light and post-roast CO₂ | High-barrier laminate plus valve where required |
Ground Coffee | Rapid oxidation and aroma loss | Foil laminate with vacuum, nitrogen flush or valve as appropriate |
Instant Coffee | Moisture uptake and aroma protection | High-barrier sachet or stick-pack structure |
Premium Tea | Moisture, oxygen, light and external odor | PET/AL/PE, paper/foil laminate or application-specific structure |
Spices and Masala | Essential-oil loss, moisture and seal contamination | High-barrier foil with compatible sealant and adhesive |
Herbs and Botanical Blends | Aroma retention, moisture and puncture from coarse material | Foil laminate with optional nylon reinforcement |
Bakery Flavor Ingredients | Oxidation, aroma loss and oil compatibility | Application-specific high-barrier laminate |
Nutritional / Herbal Ingredients | Moisture and oxygen sensitivity | High-barrier laminate qualified for the actual ingredient |
Food-contact suitability should be reviewed for the complete package structure rather than inferred from the AA8011 alloy alone.
Flexible food packaging supplied for European markets should be evaluated against Regulation (EC) No 1935/2004 and applicable good manufacturing practice requirements.
Printing inks on the non-food-contact side should be formulated and processed so that substances do not transfer through the material or by set-off to the food-contact side at levels that make the finished material unsuitable.
EU Regulation 10/2011 applies to relevant plastic food-contact materials within its scope and should not be described as blanket certification for the entire aluminum-containing laminate.
U.S. food-contact suitability depends on the specific films, adhesives, inks, coatings and sealants together with the intended food and conditions of use.
Projects requiring SFDA, SASO or other destination-market documentation should identify the exact product, laminate structure, food-contact layer and market before commercial production.
Inspection Item | Why It Matters | Control Direction |
|---|---|---|
Alloy and Temper | Confirms foil substrate condition | Verify AA8011-O where contractually specified |
Foil Thickness | Influences barrier and converting behavior | Measure aluminum independently from polymer and adhesive layers |
Total Laminate Thickness | Influences stiffness, package feel and machine performance | Control separately from foil gauge |
Pinhole Inspection | Supports barrier consistency | Agree acceptance criteria for barrier-critical thin foil |
Surface Energy | Screens wetting before printing or lamination | 38+ dynes/cm can be specified where appropriate |
Ink Adhesion | Protects printed appearance | Evaluate after full curing |
Lamination Bond Strength | Reduces risk of ply separation | Test after complete adhesive cure |
OTR | Quantifies oxygen barrier | Test exact laminate under agreed conditions |
WVTR | Quantifies moisture barrier | State temperature and relative humidity |
Seal Strength | Critical for package tightness | ASTM F88/F88M or agreed method |
Hot Tack | Supports high-speed packaging | Evaluate under representative machine conditions |
Seal-Through-Contamination | Important for powders and coffee dust | Test with representative product contamination |
Residual Solvent / Odor | Important for aroma-sensitive foods | Define project-specific acceptance level where required |
Flex Resistance | Screens foil-barrier damage during pouch conversion | Evaluate barrier after representative flexing where critical |
Valve Integrity | Critical for valved coffee packs | Verify valve attachment, opening behavior and reverse leakage |
Print Registration | Important for retail graphics and automatic cutting | Control repeat length, eye mark and lane registration |
Aroma-sensitive food packaging must combine functional protection with consistent brand presentation. Printed rollstock can include product graphics, ingredients, origin information, preparation instructions, barcodes, QR codes and market-specific labeling.
Reverse printing, controlled ink adhesion, consistent color and reliable laminate bonding can help maintain package appearance through filling, distribution and retail display.
For accurate laminate selection, sample preparation and pricing, please provide:
Packaged product: whole-bean coffee, ground coffee, tea, spices, herbs or other food
Target shelf life
Required package format
Preferred laminate structure
Required aluminum foil gauge
Total laminate thickness
Required OTR and test conditions
Required WVTR and test conditions
Seal-strength requirement
Hot-tack or seal-through-contamination requirement
Whole bean, ground or powder particle size
Product oil or essential-oil content where relevant
Roast-to-pack timing for coffee
One-way degassing-valve requirement
Valve type and position if already specified
Nitrogen-flush or vacuum requirement
Target residual oxygen if specified
Printing artwork and number of colors
Surface or reverse-print requirement
Print repeat length
VFFS, HFFS, vacuum pack or other machine type
Required roll width
Core ID, maximum reel OD and reel weight
Unwind direction
Food-contact documentation
Destination market
Order quantity
Get a Custom Aroma-Barrier Packaging Proposal
It is printed aluminum foil used within a flexible packaging structure designed to reduce oxygen, moisture, light and aroma transmission for products such as coffee, tea, spices and herbs.
AA8011-O is a soft flexible-packaging foil suitable for lamination and converting. The complete laminate provides printing, mechanical protection and sealing functions around the foil barrier.
Intact solid foil provides an extremely strong barrier through the aluminum layer, but aroma can still be lost through seals, valves, closures, flex cracks or other package defects.
It should only be treated as a contractual value when the exact finished laminate has been tested under specified conditions and meets the agreed target.
ASTM D3985 is one recognized method for measuring oxygen transmission through suitable flexible packaging materials.
ASTM F1249 is one recognized method for measuring water-vapor transmission through suitable flexible films and laminates.
No. Surface energy indicates wetting. Aroma retention also depends on lamination bond, seal integrity, package design and finished barrier performance.
No. Final bond strength also depends on surface cleanliness, adhesive chemistry, coating weight, mixing, curing and product exposure.
No. Valve need depends on how much CO₂ the coffee will continue releasing after sealing, which is affected by roast profile, grind, roast-to-pack time, fill quantity and storage conditions.
Fresh coffee can continue releasing carbon dioxide after roasting. A one-way valve can release excess gas while helping restrict reverse ingress of outside air.
No. The valve manages gas release, while the flexible laminate provides the main barrier against oxygen, moisture, light and aroma transmission.
Yes. Nitrogen flushing can be used where reducing residual headspace oxygen is part of the validated coffee-packing process.
Yes. Foil laminates can provide strong moisture, oxygen, light and external-odor protection for suitable loose-leaf and specialty-tea packaging.
Yes. Spices can benefit from strong aroma and moisture barrier, but essential-oil compatibility and powder contamination in the seal area should be evaluated.
PA nylon can improve puncture resistance and flex toughness for packages containing coarse herbs, sharp spices or other mechanically demanding products.
Certain oils and flavor compounds can interact with sealants, adhesives or coatings. Compatibility should be validated using the actual product where exposure is significant.
Seal integrity is critical because even an excellent foil barrier cannot compensate for channels or weak areas in the finished package seal.
Yes. ASTM F88/F88M is widely used for measuring seal strength of flexible barrier materials where appropriate.
Hot tack is the strength of a seal while it is still hot. It is important on high-speed packaging lines where the product can load the seal before complete cooling.
Yes, when the complete laminate's roll dimensions, stiffness, friction, repeat length, sealant and sealing window are compatible with the machine.
Yes. Where transparent outer film is used, graphics can be reverse printed and protected inside the laminate.
Conventional package printing is normally kept away from direct food contact. Direct-contact printing requires a specifically evaluated system.
No blanket claim should be made. U.S. food-contact suitability depends on the individual substances in the complete package and the intended conditions of use.
No. EU 10/2011 applies to relevant plastic food-contact materials within its scope. Other components of the complete laminate must meet their applicable requirements.
No. Shelf life also depends on product formulation, residual oxygen, moisture activity, filling process, valves, seal integrity, storage temperature and distribution conditions.
Please provide the product, package type, target shelf life, laminate structure, foil gauge, barrier targets, valve or nitrogen-flush requirements, machine type, roll dimensions, artwork, food-contact requirements, quantity and destination.
Yes. New coffee, tea, spice and aroma-sensitive food projects should be evaluated with the actual product, filling process, seals, storage conditions and required shelf-life program before commercial production.
Products
Application
Quick links
Contact Us